The Nghia Export Metal Hoof P-05 is a professional manicure and pedicure tool designed for thoroughly cleaning the nail plate and precisely removing cuticles, cuticles, membranes , and residue from gel and acrylic products. This tool is a true all-rounder for nail technicians who want a smooth, clean, and professionally prepared nail surface – without the risk of unnecessary damage. The Nghia P-05 is made of polished, surgical-grade stainless steel . This material is known for its durability, wear resistance, and hygienic properties. The polished finish makes the surface easy to clean and reduces product residue, making it ideal for intensive salon work. What makes this model extra versatile are its two different, ultra-precise tips . One side features a slightly curved, beveled knife-like tip with a 5.5 mm blade width. This side is perfect for loosening stubborn debris (such as gel or acrylic fragments), cleaning the nail plate, and carefully removing thin skin and membranes. The other side is a rounded, convex chisel with a 10 mm blade width. This wider chisel is ideal for pushing back the cuticle in a controlled manner and evenly "scraping" the nail plate without an aggressive cutting action. The lightly serrated handle provides extra grip and prevents slippage during precision work. This allows you to maintain maximum control, even when working with greater precision or performing longer treatments. With a total length of 13.9 cm and a weight of 31 grams , this instrument is stable, secure, and comfortable to hold. The P-05 is fully suitable for professional hygiene: the instrument can be disinfected and sterilized using all common methods (chemical, thermal, and chemical-thermal), including autoclaving. This means it meets the hygiene standards required in professional nail salons and pedicure practices. Sterilization and disinfection Autoclave: basic sterilization at 121°C for 15 minutes ; deactivation temperature 132–134°C at a pressure of 3 bar . Chemical disinfection: Use only agents intended for this purpose and always follow the manufacturer's recommendations. Important points of interest Steel, including stainless steel, can be damaged under specific conditions. A solution that is too strong or a disinfection time that is too long can cause discoloration, pitting, or corrosion. Therefore, always follow the disinfectant instructions and your hygiene protocol. ✔ Features / Key Benefits Professional metal hoof for manicure and pedicure For cleaning the nail plate and removing cuticles, skin and membranes Helps remove gel and acrylic residue Made of polished stainless steel (surgical grade) Two precise ends for controlled and efficient work. 5.5mm blade tip for precise cleaning and loosening work Rounded chisel 10 mm for even pushing back and scraping Serrated handle for non-slip grip and maximum control Stable balance ( 13.9 cm / 31 g ) Fully suitable for autoclaving and all disinfection methods Instructions for use Use the blade-shaped side to gently loosen and remove product residue, skin, and membranes. Use the rounded chisel to evenly push back the cuticle and clean the nail plate. Apply light pressure and short, controlled strokes. Clean and sterilize the instrument after each treatment according to current hygiene guidelines. Specifications / Technical information Type: metal hoof / kopytko Model: P-05 Material: Polished stainless steel Ends: knife-shaped + rounded convex chisel Blade width: 5.5 mm Chisel blade width: 10 mm Handle: slightly serrated (anti-slip) Total length: 13.9 cm Weight: 31 g Sterilization: chemical, thermal, chemical-thermal (autoclave) Is this instrument suitable for gel and acrylic residues? Yes, the blade-shaped side is designed to help gently remove gel and acrylic residue from the nail plate. What is the advantage of the 10mm wide chisel? You can push back the cuticle faster and more evenly, especially with wider nail plates or when you want to work efficiently. Is the handle non-slip? Yes, the slightly serrated handle provides extra grip and prevents slipping during precision work. Can this metal hoof be autoclaved? Yes, the P-05 is fully suitable for autoclave sterilization. Is this instrument suitable for professional use? Yes, it is made of surgical stainless steel and designed for intensive use in manicure and pedicure practices.

Read more less

The Nghia Export Metal Hoof P-06 is a professional manicure and pedicure instrument specifically designed for the safe and controlled retraction of tightly attached periungual skin (the skin surrounding the nail) from the nail plate. This model is ideal for precise nail preparation before manicures, pedicures, and nail treatments. The Nghia P-06 is crafted from high-quality stainless steel with a slightly matte finish , as used in surgical instruments. This finish enhances control while working, reduces reflections under strong salon lighting, and contributes to a long lifespan and optimal hygiene. The instrument features a 9mm groove-shaped tip , designed to distribute pressure evenly while pushing back the skin. This allows you to work efficiently and safely , without aggressively cutting or damaging the nail plate. This makes the P-06 particularly suitable for clients with tightly attached cuticles or sensitive nail areas. With a generous total length of 14.4 cm and a weight of only 25 grams, the instrument fits securely and comfortably in the hand. Its balance and length allow for maximum control with minimal effort, even during longer sessions. The metal hoof is fully suitable for professional disinfection and sterilization . The instrument can be cleaned using chemical, thermal, and chemical-thermal methods and is autoclavable. This means it meets the hygiene requirements of professional nail salons and pedicure practices. Sterilization and disinfection Autoclave: basic sterilization at 121°C for 15 minutes ; deactivation temperature 132–134°C at a pressure of 3 bar . Chemical disinfection: Use only suitable agents and strictly follow the manufacturer's recommendations. Important points of interest Steel, including stainless steel, can be damaged by improper handling. Excessively strong solutions or excessively long disinfection times can lead to discoloration, pitting, or corrosion. ✔ Features / Key Benefits Professional metal hoof for manicure and pedicure Specially designed for pushing back tightly attached skin Made of stainless steel with a slightly matt finish 9 mm gutter-shaped tip for even pressure distribution Work safely and in a controlled manner without damaging the nail plate. Comfortable size ( 14.4 cm ) Lightweight and well balanced ( 25 g ) Fully suitable for autoclave and professional disinfection Instructions for use Gently place the groove-shaped tip against the cuticle and push the skin back from the nail plate with even pressure. Work without forcing and with controlled movements. Clean and sterilize the instrument after each treatment according to current hygiene guidelines. Specifications / Technical information Type: metal hoof / kopytko (gutter-shaped) Model: P-06 Application: pushing back periungual skin Material: stainless steel Finish: lightly matted Point: gutter-shaped Blade width: 9 mm Total length: 14.4 cm Weight: 25 g Sterilization: chemical, thermal, chemical-thermal (autoclave) What is the gutter-shaped tip for? The trough shape distributes pressure evenly, allowing the skin to be pushed back safely and in a controlled manner without cutting. Is this metal hoof suitable for professional use? Yes, the P-06 is designed for intensive salon and practice use and meets professional hygiene standards. Can this instrument be autoclaved? Yes, this model is fully suitable for autoclave sterilization. Is this instrument intended for removing gel or acrylic? No, this model is primarily intended for pushing back tightly attached skin; for product residue, knife- or chisel-shaped models are better suited.

Read more less

The Nghia Export Metal Hoof P-07 is a professional manicure and pedicure instrument specifically designed to reduce and push back tight periungual skin (the skin surrounding the nail) from the nail plate in a controlled manner. This makes the instrument ideal for neat nail preparation, both for traditional manicures and for professional treatments where a clean cuticle area is essential. The Nghia P-07 is crafted from stainless steel with a slightly matte finish , as used in surgical instruments. This ensures a long service life, high wear resistance, and excellent hygiene properties. The matte finish also provides additional control while working and helps reduce reflections under strong salon lighting. What makes this model unique are its two gutter-shaped tips . These are designed to push back the skin safely and evenly, without aggressive "cutting." You get two widths, so you always choose the right side for the area you're working with: a 6mm tip for precision work and smaller nail plates, and a wider 10mm side for faster work or larger nail plates. This allows you to work more efficiently, with greater control, and with consistent results. With a total length of 13.7 cm and a weight of 31 grams , the instrument fits securely in your hand and offers just the right balance between control and power. This is important when you need to gently loosen tightly attached skin without damaging the nail plate. The metal hoof is fully suitable for professional disinfection and sterilization . The instrument can be disinfected and sterilized using chemical, thermal, and chemical-thermal methods, including autoclave sterilization. This means it meets the hygiene standards of professional nail salons. Sterilization and disinfection Autoclave: basic sterilization at 121°C for 15 minutes ; deactivation temperature 132–134°C at a pressure of 3 bar . Chemical disinfection: Use only agents intended for this purpose and always follow the manufacturer's recommendations. Important points of interest Steel, including stainless steel, can be damaged under specific conditions. Solutions that are too strong or disinfection times that are too long can cause discoloration, pitting, or corrosion. ✔ Features / Key Benefits Professional metal hoof for manicure and pedicure Specially designed for pushing back tightly attached skin around the nail Made of stainless steel with a slightly matt finish Two gutter-shaped ends for even, safe pressure distribution Ends with blade widths 6 mm and 10 mm Stable and comfortable size ( 13.7 cm ) Professional weight and balance ( 31 g ) Fully suitable for autoclaving and all disinfection methods Instructions for use Choose the appropriate tip (6 mm or 10 mm) depending on the nail plate and desired precision. Gently push back the skin around the nail with even pressure. Work without forcing and with small, controlled movements. Clean and sterilize the instrument after each treatment according to hygiene guidelines. Specifications / Technical information Type: metal hoof / kopytko (gutter-shaped) Model: P-07 Application: pushing back periungual skin Material: stainless steel Finish: lightly matted Ends: 2x gutter-shaped Blade widths: 6 mm and 10 mm Total length: 13.7 cm Weight: 31 g Sterilization: chemical, thermal, chemical-thermal (autoclave) What is the gutter shape intended for? The trough shape distributes pressure evenly, allowing you to push back the skin safely and in a controlled manner without using aggression. What is the advantage of two widths (6mm and 10mm)? You can choose between precision work (6 mm) and faster work on larger nail plates (10 mm). Is this instrument suitable for professional use? Yes, the P-07 is designed for intensive salon work and meets professional hygiene standards. Can this metal hoof be autoclaved? Yes, the instrument is fully suitable for autoclave sterilization. Is this instrument intended to remove gel or acrylic? This model is primarily intended for pushing back tightly attached skin around the nail; for product residue, knife/chisel-shaped models are often more suitable.

Read more less

The Nghia Export Metal Hoof P-08 is a professional manicure and pedicure instrument specifically designed for carefully cleaning the nail plate and precisely removing cuticles, cuticles, membranes , and residue from gel and acrylic products. Thanks to the combination of two functional sides, this tool is a versatile tool for daily professional use. The metal hoof is made of high-quality polished stainless steel , the same material used in surgical instruments. This guarantees a long service life, excellent wear resistance, and maximum hygiene. The smooth surface facilitates thorough cleaning and prevents product residue from adhering. The Nghia P-08 features two distinct, precision-formed tips . One side is a slightly curved, beveled knife-like point with a 4.5mm blade width, ideal for loosening and removing stuck cuticles and product residue. The other side is a rounded, convex chisel with an 8mm blade width, perfect for gently and evenly pushing back the cuticle and smoothing the nail plate. The lightly serrated handle provides a firm, non-slip grip and prevents slipping while working, even during precision work or longer treatments. With a total length of 13.3 cm and a weight of only 20 grams , this instrument is lightweight, perfectly balanced, and comfortable to use. The metal hoof is fully suitable for professional disinfection and sterilization . The instrument can be easily cleaned using chemical, thermal, and chemical-thermal methods, including autoclave sterilization. This ensures it meets the high hygiene standards required in professional nail salons. Sterilization and disinfection Autoclave: basic sterilization at 121°C for 15 minutes ; deactivation temperature 132–134°C at a pressure of 3 bar . Chemical disinfection: use only suitable agents and always follow the manufacturer's recommendations. Important points of interest Steel—even high-quality stainless steel—can be damaged if handled improperly. Solutions that are too strong or disinfection times that are too long can lead to discoloration, pitting, or corrosion. ✔ Features / Key Benefits Professional metal hoof for manicure and pedicure Made of polished stainless steel Two functional ends for versatile use 4.5mm blade tip for precise cleaning work Rounded chisel 8 mm for safely pushing back cuticles Serrated handle for non-slip and optimal control Lightweight and perfectly balanced ( 13.3 cm / 20 g ) Fully suitable for autoclave and professional disinfection Instructions for use Use the instrument to gently push back cuticles and remove any remaining gel, acrylic, or skin from the nail plate. Apply light pressure and short, controlled strokes. Clean and sterilize the instrument after each treatment according to current hygiene guidelines. Specifications / Technical information Type: metal hoof / kopytko Model: P-08 Material: stainless steel Ends: 4.5mm blade-shaped & 8mm rounded chisel Handle: slightly serrated Total length: 13.3 cm Weight: 20 g Sterilization: chemical, thermal, chemical-thermal (autoclave) Is this metal hoof suitable for professional use? Yes, this instrument is designed for intensive professional use in manicure and pedicure salons. What are the two different ends for? The blade-shaped tip is designed for removing cuticles and product residue, while the rounded chisel is ideal for gently pushing back the cuticle. Can this metal hoof be autoclaved? Yes, the Nghia P-08 is fully suitable for autoclave sterilization. Is the instrument light to use? Yes, with a weight of only 20 grams it is very light and comfortable, even during longer treatments. Is this instrument suitable for gel and acrylic residues? Yes, it is specially designed to safely remove gel and acrylic residue from the nail plate.

Read more less

The Nghia Export Metal Hoof P-09 is a professional manicure and pedicure tool, designed for precise cleaning of the nail plate and the safe removal of cuticles, cuticles, membranes , and gel or acrylic residue. Its sophisticated design and high-quality finish make this tool an indispensable tool for both salon professionals and demanding specialists. The instrument is made of polished stainless steel , the same material used for surgical instruments. This guarantees high wear resistance, long-lasting precision, and excellent hygienic properties. The smooth, polished finish makes cleaning easy and prevents product residue from adhering to the surface. The Nghia P-09 features two distinct, highly precise working ends . One end features a slightly curved, beveled knife-like tip with a 3.5 mm blade width, ideal for loosening and removing stubborn product residue and cuticles. The other end is a rounded, convex chisel with a 5 mm blade width, perfect for gently pushing back cuticles and smoothing the nail plate without damage. The lightly serrated handle prevents slippage while working and offers optimal control, even during precision work or longer treatments. With a total length of 13.3 cm and a weight of 26 grams , the instrument is perfectly balanced and comfortable to hold. The metal hoof is fully suitable for professional disinfection and sterilization . The instrument can be easily cleaned using chemical, thermal, and chemical-thermal methods, including autoclave sterilization, which is essential for professional and hygienic work. Sterilization and disinfection Autoclave: basic sterilization at 121°C for 15 minutes ; deactivation temperature 132–134°C at a pressure of 3 bar . Chemical disinfection: use only suitable agents and always follow the manufacturer's recommendations. Important points of interest Steel—even high-quality stainless steel—can be damaged under improper conditions. Solutions that are too strong or disinfection times that are too long can lead to discoloration, pitting, or corrosion. ✔ Features / Key Benefits Professional metal hoof for manicure and pedicure Made of polished stainless steel Two precision tips for versatile use 3.5mm blade tip for precise cleaning work Rounded chisel 5 mm for safely pushing back cuticles Serrated handle for non-slip and optimal control Perfectly balanced size ( 13.3 cm ) Fully suitable for autoclave and professional disinfection Instructions for use Use the instrument to gently push back cuticles and remove any remaining gel, acrylic, or skin from the nail plate. Apply light pressure and short, controlled strokes. Clean and sterilize the instrument after each treatment according to current hygiene guidelines. Specifications / Technical information Type: metal hoof / kopytko Model: P-09 Material: stainless steel Ends: 3.5mm blade-shaped & 5mm rounded chisel Handle: slightly serrated Total length: 13.3 cm Weight: 26 g Sterilization: chemical, thermal, chemical-thermal (autoclave) Is this metal hoof suitable for professional use? Yes, this instrument is designed for intensive professional use in manicure and pedicure salons. What are the two different ends for? The blade-shaped tip is ideal for removing product residue and cuticles, while the rounded chisel is suitable for gently pushing back the cuticle. Can this instrument be autoclaved? Yes, the Nghia P-09 is fully suitable for autoclave sterilization. Is the handle non-slip? Yes, the slightly serrated handle prevents slipping while working. Is this instrument suitable for gel and acrylic residues? Yes, it is specially designed to safely remove gel and acrylic residue from the nail plate.

Read more less

The Nghia EVO 07 Cuticle Nipper, 14-bit (6 mm) , is an exclusive, premium model within the popular Nghia line of nail nippers. This EVO model combines professional cutting precision with a luxurious presentation: crafted from surgical-grade stainless steel , with a gold-coated handle , and delivered in a stylish velvet-lined box . Ideal for nail technicians, manicurists, and pedicurists who demand not only top performance but also appreciate a premium look in their tools. The cuticle nippers are equipped with a 14-gauge (6 mm) blade . This cutting edge offers the perfect balance between speed and precision: large enough for efficient work, yet fine enough for controlled cuts along the cuticle line. The result is a crisp, clean finish without pulling or fraying, essential for a neat manicure and a professional final look. A key technical advantage is the lap joint (not countersunk). This design minimizes wear and reduces the risk of play, ensuring the pliers remain stable, sharp, and precise for extended periods . In practice, this means less force, greater control, and an instrument that maintains its quality even under intensive use. The double-sided spring , mounted on a stainless steel screw, ensures smooth, consistent opening and closing. This increases working comfort and reduces hand fatigue during longer sessions. The classically profiled handle sits securely in the hand and supports a precise working position – exactly what you need for detailed cuticle work. With a total length of 11 cm and a weight of 40 grams , the EVO 07 is perfectly balanced for professional daily use. Hygiene is a given: the Nghia EVO 07 is compatible with all disinfection and sterilization methods , including autoclaving. This makes it ideal for use in professional environments with strict hygiene protocols. Sterilization and disinfection Autoclave: basic sterilization at 121°C for 15 minutes ; deactivation temperature 132–134°C at a pressure of 3 bar . Chemical disinfection: Use only liquids intended for this purpose and always strictly follow the manufacturer's recommendations. Important points of interest Steel, including stainless steel, can be damaged under improper conditions. Excessively strong solutions or excessively long disinfection times can lead to discoloration, pitting, or corrosion. Therefore, always follow the instructions for the disinfectant and the sterilization procedure. ✔ Features / Key Benefits Exclusive EVO line with premium finish Jaw size 14 (6 mm) for efficient and precise cuticle work Made of surgical stainless steel Gold-colored coated handle for a luxurious appearance and recognizability Supplied in a velvet storage box for neat storage and presentation Lap joint hinge for minimal wear and long-term stability Double-sided spring for smooth, even operation Classic ergonomic handle for comfort and maximum control Fully suitable for autoclave and professional disinfection Instructions for use Use the cuticle nippers only for cutting cuticles. Use short, controlled cutting strokes and avoid pulling on the skin. Clean the instrument immediately after use and sterilize/disinfect it according to your salon's hygiene protocol. Specifications / Technical information Type: professional cuticle pliers Line: Nghia EVO Model: EVO 07 Mouth size: 14 Cutting edge: 6 mm Material: stainless steel Hinge: lap joint (not recessed) Spring: double-sided, stainless steel screw Handle: gold-colored coated Total length: 11 cm Weight: 40 g Sterilization: chemical, thermal, chemical-thermal (autoclave) Packaging: box with velvet lining Is this a professional cuticle nippers for salon use? Yes, the EVO 07 is designed for intensive professional use and meets hygiene requirements such as autoclave sterilization. What is the advantage of jaw size 14 (6 mm)? You work faster and more efficiently than with smaller beak sizes, while still maintaining sufficient precision along the cuticle line. Why is the lap joint connection important? The lap joint reduces wear and prevents play, keeping the pliers stable and accurate for long periods of time. Is the gold handle purely cosmetic? It gives a luxurious look and makes the tool easily recognizable in your kit, while the basic functionality remains professional and robust. Do the cuticle nippers come with a storage box? Yes, this model comes in a stylish box with a velvet lining for neat storage and presentation.

Read more less

The Nghia Export Cuticle Nipper C-02, 12-bit (5 mm) is a high-quality professional cuticle nipper, specially designed for extremely precise and controlled cutting of cuticles . This model, with a 12-bit (5 mm) blade , is ideal for precision work and is often used by professional manicure and pedicure specialists who demand maximum control. The cuticle nippers are made of high-quality cobalt steel , a material known for its exceptional hardness, wear resistance, and long-lasting sharpness. This ensures the cutting edge remains extremely sharp, even with intensive, daily professional use. This results in a clean, precise cut without pulling, tearing, or damaging the cuticle . A key technical feature of this model is the box joint hinge (recessed). This advanced connection method minimizes material wear and completely eliminates play. Compared to other hinge techniques, the box joint offers superior stability, higher precision, and a significantly longer service life . The single-sided spring , mounted on a stainless steel screw, ensures smooth, controlled opening and closing. This reduces hand and wrist strain and increases working comfort during extended treatments. The ergonomically profiled handle fits securely in the hand and allows for extremely precise work. With a total length of 10.5 cm and a weight of 40 grams , the pliers are perfectly balanced. The Nghia Export C-02 Bek 12 meets professional hygiene standards and is fully suitable for all methods of disinfection and sterilization , including chemical, thermal and chemical-thermal processes, including autoclave use. Sterilization and disinfection Autoclave: basic sterilization at 121°C for 15 minutes ; deactivation temperature 132–134°C at a pressure of 3 bar . Chemical disinfection: carry out only with suitable agents and strictly in accordance with the manufacturer's recommendations. Important points of interest Steel—including high-quality cobalt and stainless steel—can be damaged if handled improperly. Solutions that are too strong or disinfection times that are too long can lead to discoloration, pitting, or corrosion. ✔ Features / Key Benefits Professional cuticle pliers for intensive salon use Jaw size 12 (5 mm) for maximum precision work Made of high-quality cobalt steel for long-lasting sharpness Box joint hinge for maximum stability and durability Single-sided spring for smooth and controlled operation Ergonomic handle for comfort and precision Perfectly balanced size ( 10.5 cm ) Fully suitable for autoclaving and all disinfection methods Instructions for use Use the cuticle nippers only for cutting cuticles. Use short, controlled strokes. Clean and sterilize the instrument after each use according to current hygiene guidelines. Specifications / Technical information Type: professional cuticle pliers Model: C-02 Mouth size: 12 Cutting edge: 5 mm Material: cobalt steel Hinge: box joint (recessed) Spring: single-sided, stainless steel screw Total length: 10.5 cm Weight: 40 g Sterilization: chemical, thermal, chemical-thermal (autoclave) Is this cuticle nippers suitable for professional use? Yes, this model is specially designed for intensive professional use in manicure and pedicure salons. What is the advantage of cobalt steel? Cobalt steel retains its sharpness much longer and is more wear resistant than standard stainless steel. Why choose a box joint hinge? A box joint prevents play, increases stability and significantly extends the life of the instrument. Can these cuticle nippers be autoclaved? Yes, the clamp is fully suitable for autoclave sterilization according to the recommended parameters. Who is jaw size 12 (5 mm) most suitable for? This size is ideal for very precise work and for professionals who want maximum control when cutting cuticles.

Read more less

The Nghia Export Cuticle Nipper C-02 with 14-gauge (6 mm) is a high-quality professional cuticle nipper designed for extremely precise and controlled cutting of cuticles . This 14-gauge (6 mm) model is ideal for professionals who need a larger cutting surface without sacrificing precision. It is designed for intensive use in professional manicure, pedicure, and nail salons. The cuticle nippers are made of high-quality cobalt steel , a material known for its exceptional hardness, wear resistance, and long-lasting sharpness. Thanks to this type of steel, the cutting edge remains extremely sharp, even with frequent and prolonged professional use. This guarantees a clean, controlled cut without pulling or tearing the cuticle . A key technical advantage of this model is the use of the box joint (recessed) hinge . This design minimizes material wear and completely eliminates play, ensuring perfect stability, maximum control, and an exceptionally long service life compared to other connection methods. The single-sided spring , mounted with a stainless steel screw, ensures smooth, consistent opening and closing of the pliers. This significantly increases working comfort and reduces hand and wrist strain during prolonged treatments. The ergonomically profiled handle fits securely in the hand and offers optimal control. With a total length of 10.5 cm and a weight of 40 grams , the pliers are perfectly balanced for professional precision work. The Nghia Export C-02 Bek 14 meets strict hygiene requirements and is fully suitable for all forms of disinfection and sterilization , including chemical, thermal and chemical-thermal methods, including autoclave sterilization. Sterilization and disinfection Autoclave: basic sterilization at 121°C for 15 minutes ; deactivation temperature 132–134°C at a pressure of 3 bar . Chemical disinfection: use only the appropriate liquids and strictly follow the manufacturer's recommendations. Important points of interest Steel—including high-quality cobalt and stainless steel—can be damaged if handled improperly. Excessively strong solutions or excessively long disinfection times can lead to discoloration, pitting, or corrosion. ✔ Features / Key Benefits Professional cuticle pliers for intensive use Jaw size 14 (6 mm) for controlled and efficient cutting Made of high-quality cobalt steel for long-lasting sharpness Box joint hinge for maximum stability and durability Single-sided spring for smooth and precise operation Ergonomic handle for optimum working comfort Perfectly balanced size ( 10.5 cm ) Suitable for autoclave and all disinfection methods Instructions for use Use the cuticle nippers only for cutting cuticles. Use short, controlled strokes. Clean and sterilize the instrument after each use according to current hygiene guidelines. Specifications / Technical information Type: professional cuticle pliers Model: C-02 Mouth size: 14 Cutting edge: 6 mm Material: cobalt steel Hinge: box joint (recessed) Spring: single-sided, stainless steel screw Total length: 10.5 cm Weight: 40 g Sterilization: chemical, thermal, chemical-thermal (autoclave) Is this cuticle nippers suitable for professional use? Yes, this model has been specially developed for professional and intensive use in nail studios and salons. What is the advantage of cobalt steel? Cobalt steel offers exceptional hardness and retains its sharpness significantly longer than standard stainless steel. Why is a box joint hinge better? The box joint prevents play, reduces wear and ensures maximum stability and precision. Can these cuticle nippers be autoclaved? Yes, the forceps are fully suitable for autoclave sterilization according to the recommended settings. Who is jaw size 14 (6 mm) most suitable for? This size is ideal for professionals who want a little more cutting surface without loss of control.

Read more less

The Nghia Export Cuticle Nipper C-03 12-bit (5 mm) is a professional cuticle nipper designed for extremely precise and controlled cutting of cuticles . This 12-bit (5 mm) model is ideal for precision work and is widely used in professional manicure and pedicure practices where reliability, sharpness, and comfort are essential. The cuticle nippers are made of high-quality stainless steel , as used in surgical instruments. This guarantees excellent durability, long-lasting sharpness, and high corrosion resistance. Thanks to the narrow 5 mm cutting blade , this instrument is perfect for fine detail work around the cuticles, with maximum control and minimal risk of skin damage. The use of the lap joint hinge (not recessed) minimizes material wear and prevents play, even during intensive daily use. Compared to other connection methods, this design ensures stable operation, consistent precision, and a long service life . The single-sided spring , secured with a stainless steel screw, provides smooth, controlled opening and closing of the pliers. This significantly increases working comfort and reduces hand fatigue during prolonged sessions. The classically profiled handle fits ergonomically in the hand and offers optimal grip and control. With a total length of 10.5 cm and a weight of 40 grams , these cuticle pliers are perfectly balanced for professional precision work. The Nghia Export C-03 Bek 12 meets all professional hygiene standards and is suitable for all forms of disinfection and sterilization , including chemical, thermal and chemical-thermal methods, including autoclave sterilization. Sterilization and disinfection Autoclave: basic sterilization at 121°C for 15 minutes ; deactivation temperature 132–134°C at a pressure of 3 bar . Chemical disinfection: Carry out only with suitable liquids and strictly in accordance with the manufacturer's recommendations. Important points of interest Steel, including stainless steel, can be damaged by improper handling. Excessively strong solutions or excessively long disinfection times can lead to discoloration, pitting, or corrosion of the instrument. ✔ Features / Key Benefits Professional cuticle pliers for precision work Jaw size 12 (5 mm) for controlled cutting of cuticles Made of high quality stainless steel Lap joint hinge for maximum stability and durability Single-sided spring for smooth and precise operation Classic ergonomic handle for optimum working comfort Compact size ( 10.5 cm ) and perfectly balanced Suitable for autoclave and all disinfection methods Instructions for use Use the cuticle nippers only for cutting cuticles. Use short, controlled strokes. Clean and sterilize the instrument after each use according to current hygiene guidelines. Specifications / Technical information Type: professional cuticle pliers Model: C-03 Mouth size: 12 Cutting edge: 5 mm Material: stainless steel Hinge: lap joint (not recessed) Spring: single-sided, stainless steel screw Total length: 10.5 cm Weight: 40 g Sterilization: chemical, thermal, chemical-thermal (autoclave) Is this cuticle nippers suitable for professional use? Yes, this model is specially designed for intensive professional use in manicure and pedicure practices. What is the advantage of jaw size 12 (5 mm)? This size offers maximum precision and control when cutting cuticles. What does the lap joint hinge connection do? This connection reduces wear and prevents play, keeping the pliers accurate for a long time. Can these cuticle nippers be autoclaved? Yes, the forceps are fully suitable for autoclave sterilization according to the recommended settings. Who is this instrument most suitable for? For professional nail stylists, manicurists and pedicurists who place high demands on precision and hygiene.

Read more less

The Nghia Export Cuticle Nipper C-04, 12-bit (5 mm) is a high-quality, professional cuticle nipper designed for extremely precise and controlled cutting of cuticles . This 12-bit (5 mm) model is ideal for detailed work and is widely used in professional manicure and pedicure practices where precision and reliability are paramount. Crafted from high-quality stainless steel , the cuticle nippers guarantee long-lasting sharpness, corrosion resistance, and a perfect finish. Thanks to their narrow 5 mm cutting blades , this tool is particularly suitable for fine, controlled trimming around the cuticles, without damaging the surrounding skin. The use of the lap joint hinge (not recessed) ensures minimal wear on the material and prevents play, even during intensive professional use. Compared to other connection methods, this design offers stable operation, consistent precision, and a long service life . The double-sided spring , secured with a stainless steel screw, guarantees smooth and consistent opening and closing of the pliers. This significantly increases working comfort and reduces hand fatigue during prolonged use. The classically profiled handle fits comfortably in the hand and offers optimal control during every operation. With a total length of 10.5 cm and a weight of 40 grams , the pliers are perfectly balanced for professional precision work. The Nghia Export C-04 Bek 12 meets all professional hygiene standards and is suitable for all forms of disinfection and sterilization , including chemical, thermal and chemical-thermal methods, including autoclave. Sterilization and disinfection Autoclave: basic sterilization at 121°C for 15 minutes ; deactivation temperature 132–134°C at a pressure of 3 bar . Chemical disinfection: Use only suitable liquids and strictly follow the manufacturer's recommendations. Important points of interest Steel, including stainless steel, can be damaged if used improperly. Excessively strong solutions or excessively long disinfection times can lead to discoloration, pitting, or corrosion of the instrument. ✔ Features / Key Benefits Professional cuticle pliers for precision work Mouth size 12 (5 mm) for fine and controlled cutting Made of high quality stainless steel Lap joint hinge for stability and durability Double-sided spring for smooth and even operation Classic ergonomic handle for optimal control Compact size ( 10.5 cm ) and perfectly balanced Suitable for autoclave and all disinfection methods Instructions for use Use the cuticle nippers only for cutting cuticles. Use small, controlled strokes. Clean and sterilize the instrument after each use according to current hygiene guidelines. Specifications / Technical information Type: professional cuticle pliers Model: C-04 Mouth size: 12 Cutting edge: 5 mm Material: stainless steel Hinge: lap joint (not recessed) Spring: double-sided, stainless steel screw Total length: 10.5 cm Weight: 40 g Sterilization: chemical, thermal, chemical-thermal (autoclave) Is this cuticle nippers suitable for professional use? Yes, this model is designed for intensive professional use in manicure and pedicure practices. What is the advantage of jaw size 12 (5 mm)? This size is ideal for very precise and detailed cutting of cuticles. What does the lap joint connection do? This connection reduces wear and prevents play, allowing the pliers to continue working precisely for longer. Can these cuticle nippers be sterilized in an autoclave? Yes, the pliers are completely autoclavable at the recommended settings. Who is this cuticle pliers most suitable for? For professional nail technicians, manicurists and pedicurists who demand maximum precision and control.

Read more less

The Nghia Export Cuticle Nipper C-04 Jaw 14 (6 mm) is a professional cuticle nipper with a 14-gauge (6 mm) blade , designed for precise, controlled, and efficient cutting of cuticles . This model is designed for intensive professional use in nail salons and manicure and pedicure practices where reliability, sharpness, and working comfort are essential. The cuticle nippers are crafted from high-quality, professional-grade stainless steel . The 6mm cutting blades offer an excellent balance of precision and speed, allowing for clean, precise cuticle removal without pulling or damaging the skin. Ideal for both detailed work and more rapid applications. Thanks to the lap joint (not countersunk), material wear is minimized and the pliers remain stable for extended periods without play. Compared to other connection methods, this design guarantees durability, consistent sharpness, and long-lasting precision , even during daily professional use. The double-sided spring , mounted on a stainless steel screw, ensures a smooth, even opening and closing of the pliers. This significantly reduces hand fatigue and increases working comfort. The classically profiled handle fits securely in the hand and offers optimal control and precision. With a total length of 10.5 cm and a weight of 40 grams , these cuticle pliers are compact, perfectly balanced, and very comfortable to use. The Nghia Export C-04 meets professional hygiene standards and is suitable for all forms of disinfection and sterilization : chemical, thermal and chemical-thermal, including autoclave. Sterilization and disinfection Autoclave: basic sterilization at 121°C for 15 minutes ; deactivation temperature 132–134°C at a pressure of 3 bar . Chemical disinfection: Use only agents intended for this purpose and always follow the manufacturer's recommendations. Important points of interest Steel, including stainless steel, can be damaged under improper conditions. Disinfectant solutions that are too strong or leave on for too long can lead to discoloration, pitting, or corrosion of the instrument. ✔ Features / Key Benefits Professional cuticle pliers for precise work Jaw size 14 (6 mm) for optimal balance between precision and speed Made of high quality stainless steel Lap joint hinge for minimal wear and high stability Double-sided spring for smooth, even operation Classic ergonomic handle for comfort and control Compact size ( 10.5 cm ) for professional and detailed work Suitable for autoclave and all disinfection methods Instructions for use Use the cuticle nippers only for cutting cuticles. Use small, controlled movements to avoid damaging the skin. Clean and sterilize the instrument after each use according to the hygiene protocol. Specifications / Technical information Type: professional cuticle pliers Model: C-04 Mouth size: 14 Cutting edge: 6 mm Material: stainless steel Hinge: lap joint (not recessed) Spring: double-sided, with stainless steel screw Total length: 10.5 cm Weight: 40 g Sterilization: chemical, thermal, chemical-thermal (autoclave) Is this cuticle nippers suitable for professional use? Yes, the C-04 Beak 14 has been specially developed for professional nail stylists, manicurists and pedicurists. What is the advantage of jaw size 14 (6 mm)? This size offers greater efficiency when cutting cuticles while maintaining precision. What is the advantage of a double-sided spring? A double-sided spring ensures smooth opening and closing, which increases working comfort and reduces hand fatigue. Can these cuticle nippers be autoclaved? Yes, the C-04 Bek 14 is fully suitable for autoclave sterilization according to the recommended parameters.

Read more less

The Nghia Export Cuticle Nipper C-05 Jaw 12 (5 mm) is a professional cuticle nipper with a 12-gauge (5 mm) jaw , designed for extremely precise and controlled cutting of cuticles . This instrument is designed for daily professional use in nail salons, manicure and pedicure practices where precision, safety and comfort are essential. The cuticle nippers are made of high-quality, surgical-grade stainless steel . The sharp 5mm cutting blades allow for precise and clean cuticle removal without pulling or damaging the skin. This results in a sleek, polished, and professional finish for every manicure. The lap joint hinge (not recessed) minimizes wear and prevents play during use. Compared to other joining methods, this construction guarantees durability, consistent sharpness, and long-lasting precision , even with intensive daily use. The single-sided spring , mounted on a stainless steel screw, ensures a controlled and smooth opening of the pliers. This significantly reduces hand fatigue. The classically profiled handle fits securely and comfortably in the hand, offering maximum control and working comfort. With a total length of 10.5 cm and a weight of 40 grams , these cuticle pliers are compact, perfectly balanced, and very precise. The Nghia Export C-05 meets professional hygiene standards and is suitable for all forms of disinfection and sterilization : chemical, thermal and chemical-thermal, including autoclave. Sterilization and disinfection Autoclave: basic sterilization at 121°C for 15 minutes ; deactivation temperature 132–134°C at a pressure of 3 bar . Chemical disinfection: Use only agents intended for this purpose and always follow the manufacturer's recommendations. Important points of interest Steel, including stainless steel, can be damaged under improper conditions. Disinfectant solutions that are too strong or leave on for too long can lead to discoloration, pitting, or corrosion of the instrument. ✔ Features / Key Benefits Professional cuticle pliers for extremely precise work Jaw size 12 (5 mm) for maximum control Made of surgical stainless steel Lap joint hinge for minimal wear and high stability Single-sided spring for controlled, ergonomic operation Classic ergonomic handle for comfort and precision Compact size ( 10.5 cm ) for fine and detailed work Suitable for autoclave and all disinfection methods Instructions for use Use the cuticle nippers only for cutting cuticles. Use small, controlled movements to avoid damaging the skin. Clean and sterilize the instrument after each use according to the hygiene protocol. Specifications / Technical information Type: professional cuticle pliers Model: C-05 Mouth size: 12 Cutting edge: 5 mm Material: stainless steel Hinge: lap joint (not recessed) Spring: single-sided, with stainless steel screw Total length: 10.5 cm Weight: 40 g Sterilization: chemical, thermal, chemical-thermal (autoclave) Is this cuticle nippers suitable for professional use? Yes, the C-05 Beak 12 is specially designed for professional nail technicians, manicurists and pedicurists. What is the advantage of jaw size 12 (5 mm)? This size is ideal for very precise cuticle work and detailed manicures. What is the difference between the C-05 and longer models? The C-05 is more compact, making it particularly suitable for fine and precise work. Can these cuticle nippers be autoclaved? Yes, the C-05 Bek 12 is fully suitable for autoclave sterilization according to the recommended parameters.

Read more less

The Nghia Export Cuticle Nipper C-06 Jaw 12 (5 mm) is a professional cuticle nipper with a 12-gauge (5 mm) jaw , designed for extremely precise and controlled cutting of cuticles . This model is intended for intensive professional use in nail salons, manicure and pedicure practices where precision, reliability, and ergonomics are paramount. The cuticle nippers are made of high-quality, surgical-grade stainless steel . The 5mm cutting blades allow for precise removal of even the finest cuticles without pulling, tearing, or damaging the skin. This results in a neat, clean, and professional finish with every treatment. Thanks to the lap joint (not countersunk) hinge connection , material wear is minimized and the pliers remain stable for extended periods without play. Compared to other connection methods, this design offers durability, consistent sharpness, and long-lasting precision , even with intensive daily use. The single-sided spring , mounted on a stainless steel screw, ensures a controlled and smooth opening of the pliers. This significantly reduces hand fatigue. The extended, ergonomically profiled handle fits comfortably and securely in the hand, guaranteeing maximum control and working comfort. With a total length of 11 cm and a weight of 40 grams , these cuticle pliers are perfectly balanced for professional use. The Nghia Export C-06 meets high hygiene standards and is suitable for all forms of disinfection and sterilization : chemical, thermal and chemical-thermal, including autoclave. Sterilization and disinfection Autoclave: basic sterilization at 121°C for 15 minutes ; deactivation temperature 132–134°C at a pressure of 3 bar . Chemical disinfection: Use only agents intended for this purpose and always follow the manufacturer's recommendations. Important points of interest Steel, including stainless steel, can be damaged under improper conditions. Disinfectant solutions that are too strong or leave on for too long can lead to discoloration, pitting, or corrosion of the instrument. ✔ Features / Key Benefits Professional cuticle pliers for precision work Jaw size 12 (5 mm) for maximum control and accuracy Made of surgical stainless steel Lap joint hinge for minimal wear and high stability Single-sided spring for ergonomic and comfortable use Extended ergonomic handle for optimal grip and precision Suitable for autoclave and all disinfection methods Developed for intensive professional use Instructions for use Use the cuticle nippers only for cutting cuticles. Use small, controlled movements to avoid damaging the skin. Clean and sterilize the nippers after each use according to the hygiene protocol. Specifications / Technical information Type: professional cuticle pliers Model: C-06 Mouth size: 12 Cutting edge: 5 mm Material: stainless steel Hinge: lap joint (not recessed) Spring: single-sided, with stainless steel screw Total length: 11 cm Weight: 40 g Sterilization: chemical, thermal, chemical-thermal (autoclave) Is this cuticle nippers suitable for professional use? Yes, the C-06 Beak 12 is specially designed for professional nail technicians, manicurists and pedicurists. What does jaw size 12 (5 mm) mean? This represents a 5mm cutting edge, ideal for very precise and detailed cuticle work. What is the advantage of a single-sided spring? A single-sided spring provides controlled resistance, which allows for greater precision and less hand strain. Can these cuticle nippers be autoclaved? Yes, the C-06 Bek 12 is fully suitable for autoclave sterilization according to the recommended parameters.

Read more less

The Nghia Export Cuticle Nipper C-07 Jaw 12 (5 mm) is a professional cuticle nipper with a 12-gauge (5 mm) jaw , specially designed for precise and controlled cutting of cuticles . This instrument is intended for intensive professional use in nail salons, manicure and pedicure practices where maximum precision, reliability, and working comfort are required. The cuticle nippers are made of high-quality, surgical-grade stainless steel . The sharp 5mm cutting blades allow for precise removal of even the finest cuticles without pulling or damaging the surrounding skin. This ensures a neat, clean, and professional result with every manicure. Thanks to the lap joint hinge (not countersunk), material wear is minimized and the pliers remain stable for extended periods without play. Compared to other joining methods, this design guarantees durability, consistent sharpness, and long-lasting precision . The double-sided spring , mounted on a stainless steel screw, ensures smooth and even opening of the pliers. This significantly reduces hand fatigue during prolonged use. The classically profiled handle fits comfortably in the hand and offers optimal control, precision, and working comfort. With a total length of 11 cm and a weight of 40 grams , these cuticle pliers are perfectly balanced. The Nghia Export C-07 Bek 12 meets professional hygiene standards and is suitable for all forms of disinfection and sterilization : chemical, thermal and chemical-thermal, including autoclave. Sterilization and disinfection Autoclave: basic sterilization at 121°C for 15 minutes ; deactivation temperature 132–134°C at a pressure of 3 bar . Chemical disinfection: Use only agents intended for this purpose and always follow the manufacturer's recommendations. Important points of interest Steel, including stainless steel, can be damaged under improper conditions. Disinfectant solutions that are too strong or leave on for too long can lead to discoloration, pitting, or corrosion of the instrument. ✔ Features / Key Benefits Professional cuticle pliers for extremely precise work Jaw size 12 (5 mm) for maximum control Made of surgical stainless steel Lap joint hinge for minimal wear and high stability Double-sided spring for smooth, ergonomic operation Classic ergonomic handle for comfort and precision Suitable for autoclave and all disinfection methods Developed for intensive professional use Instructions for use Use the cuticle nippers only for cutting cuticles. Use small, controlled movements to avoid damaging the skin. Clean and sterilize the nippers after each use according to the hygiene protocol. Specifications / Technical information Type: professional cuticle pliers Model: C-07 Mouth size: 12 Cutting edge: 5 mm Material: stainless steel Hinge: lap joint (not recessed) Spring: double-sided, with stainless steel screw Total length: 11 cm Weight: 40 g Sterilization: chemical, thermal, chemical-thermal (autoclave) Is this cuticle nippers suitable for professional use? Yes, the C-07 Beak 12 is specially designed for professional nail technicians, manicurists and pedicurists. What does jaw size 12 (5 mm) mean? This represents a 5mm cutting edge, ideal for very precise and detailed cuticle work. What is the advantage of a double-sided spring? A double-sided spring ensures smooth opening and closing, which increases working comfort and reduces hand fatigue. Can these cuticle nippers be autoclaved? Yes, the C-07 Bek 12 is fully suitable for autoclave sterilization according to the recommended parameters.

Read more less

The Nghia Export Cuticle Nipper C-07 Jaw 14 is a professional cuticle nipper with a 14-gauge (6 mm) blade , designed for precise, controlled, and safe cutting of cuticles . This model is designed for intensive professional use in nail salons, manicure and pedicure practices where precision, comfort, and durability are essential. The cuticle nippers are crafted from high-quality, surgical-grade stainless steel . The 6mm cutting blades offer the perfect balance between precision and efficiency, allowing you to remove cuticles cleanly and without pulling or damaging the skin. This makes the C-07 ideal for both manicures and detailed cuticle work. The lap joint hinge (not recessed) minimizes wear and prevents play during use. Compared to other joining methods, this design ensures consistent sharpness, stability, and long service life , even with intensive daily professional use. The double-sided spring , secured with a stainless steel screw, ensures smooth, even opening and closing of the pliers. This significantly reduces hand fatigue. The classically profiled handle fits securely in the hand and guarantees high precision and optimal working comfort. With a total length of 11 cm and a weight of 40 grams , these cuticle pliers are perfectly balanced. The Nghia Export C-07 meets strict hygiene standards and is suitable for all forms of disinfection and sterilization : chemical, thermal and chemical-thermal, including autoclave. Sterilization and disinfection Autoclave: basic sterilization at 121°C for 15 minutes ; deactivation temperature 132–134°C at a pressure of 3 bar . Chemical disinfection: Use only agents intended for this purpose and always follow the manufacturer's recommendations. Important points of interest Steel, including stainless steel, can be damaged under improper conditions. Solutions that are too strong or disinfection times that are too long can lead to discoloration, pitting, or corrosion of the instrument. ✔ Features / Key Benefits Professional cuticle pliers for precise work Jaw size 14 (6 mm) for optimum precision and efficiency Made of surgical stainless steel Lap joint hinge for minimal wear and maximum stability Double-sided spring for smooth, even operation Classic ergonomic handle for comfort and control Suitable for autoclave and all disinfection methods Developed for intensive professional use Instructions for use Use the cuticle nippers only for cutting cuticles. Use small, controlled movements to avoid damaging the skin. Clean and sterilize the instrument after each use according to the hygiene protocol. Specifications / Technical information Type: professional cuticle pliers Model: C-07 Mouth size: 14 Cutting edge: 6 mm Material: stainless steel Hinge: lap joint (not recessed) Spring: double-sided, with stainless steel screw Total length: 11 cm Weight: 40 g Sterilization: chemical, thermal, chemical-thermal (autoclave) Is this cuticle nippers suitable for professional use? Yes, the C-07 is designed for professional nail technicians, manicurists and pedicurists. What is the advantage of jaw size 14 (6 mm)? This size offers an ideal balance between precision and speed when cutting cuticles. What is the advantage of a double-sided spring? A double-sided spring ensures smooth opening and closing, which increases working comfort and reduces hand fatigue. Can these cuticle nippers be autoclaved? Yes, the C-07 is fully suitable for autoclave sterilization according to the recommended parameters.

Read more less

The Nghia Export Cuticle Nipper C-08 Jaw 12 is a professional cuticle nipper with a 12-gauge (5 mm) blade , designed for highly precise and controlled cutting of cuticles . This instrument is designed for intensive professional use in nail studios, pedicure practices, and cosmetic salons where precision, sharpness, and ergonomics are paramount. The pliers are made of high-quality, surgical-grade stainless steel . The sharp 5mm blades allow for extremely precise cuticle removal without pulling or tearing the skin. This precision makes the C-08 particularly suitable for detailed manicures. The lap joint (non-recessed) minimizes material wear and prevents play, ensuring long-term stability and consistent sharpness . Compared to other joining methods, this construction offers greater durability and reliability in daily professional use. The single-sided spring , secured with a stainless steel screw, ensures smooth and controlled opening of the pliers. This significantly reduces hand fatigue. The extended, ergonomically profiled handle fits comfortably in the hand and guarantees maximum control and working comfort. With a total length of 11.5 cm and a weight of 40 grams, these cuticle pliers are perfectly balanced. The Nghia Export C-08 meets professional hygiene standards and is suitable for all forms of disinfection and sterilization : chemical, thermal and chemical-thermal, including autoclave. Sterilization and disinfection Autoclave: basic sterilization at 121°C for 15 minutes ; deactivation temperature 132–134°C at a pressure of 3 bar . Chemical disinfection: use only with the appropriate agents and always in accordance with the manufacturer's instructions. Important points of interest Steel, including stainless steel, can be damaged under improper conditions. Excessively strong solutions or excessively long disinfection times can lead to discoloration, pitting, or corrosion of the instrument. ✔ Features / Key Benefits Professional cuticle pliers for precision work Jaw size 12 (5 mm) for extremely precise cutting Made of surgical stainless steel Lap joint hinge for minimal wear and maximum stability Single-sided spring for smooth and ergonomic operation Extended, ergonomic handle for optimal control Suitable for autoclave and all disinfection methods Developed for intensive professional use Instructions for use Use the cuticle nippers only for cutting cuticles. Use small, controlled movements to avoid damaging the skin. Clean and sterilize the instrument after each use according to the hygiene protocol. Specifications / Technical information Type: professional cuticle pliers Model: C-08 Mouth size: 12 Cutting edge: 5 mm Material: stainless steel Hinge: lap joint (not recessed) Spring: single-sided, with stainless steel screw Total length: 11.5 cm Weight: 40 g Sterilization: chemical, thermal, chemical-thermal (autoclave) Is this cuticle nippers suitable for professional use? Yes, the C-08 is specially designed for professional nail technicians and pedicurists. What does size 12 mean for cuticle nippers? Jaw size 12 represents a cutting edge of 5 mm, ideal for very precise and controlled cuticle work. Are these pliers suitable for an autoclave? Yes, the C-08 can be safely sterilized in an autoclave according to the recommended parameters. How are these pliers different from standard cuticle pliers? The combination of surgical steel, lap joint hinge and ergonomic handle ensures greater precision, durability and working comfort.

Read more less

The Nghia Export Nail Clipper N-03 Full Jaw is a professional nail clipper with a 9 mm full jaw , designed for precise, controlled, and safe nail cutting . This model is specifically designed for professional use in nail salons, pedicure practices, and medical foot care, where reliability, precision, and ergonomics are essential. The nail clippers are made of high-quality, surgical-grade stainless steel . The full jaws (9 mm) offer excellent stability and cutting power, ensuring a clean, unfrayed cut. This makes the N-03 suitable for both natural and stronger nails. The lap joint (non-recessed) reduces material wear and prevents play during use. Compared to other joining methods, this ensures consistent precision and a long service life , even with intensive daily use. The single-sided spring , mounted on a stainless steel screw, ensures controlled and smooth operation. This reduces hand fatigue and significantly increases working comfort. The extended, ergonomically profiled handle fits securely in the hand and offers maximum control and precision. At 11 cm long and weighing 53 grams , this nail clipper is perfectly balanced for professional use. The Nghia Export N-03 meets high hygiene standards and is suitable for all forms of disinfection and sterilization : chemical, thermal and chemical-thermal, including autoclave. Sterilization and disinfection Autoclave: basic sterilization at 121°C for 15 minutes ; deactivation temperature 132–134°C at a pressure of 3 bar . Chemical disinfection: Use only suitable disinfectants and always follow the manufacturer's recommendations. Important points of interest Steel, including stainless steel, can be damaged under improper conditions. Disinfectant solutions that are too strong or leave on for too long can lead to discoloration, pitting, or corrosion of the instrument. ✔ Features / Key Benefits Professional nail clippers for precise cutting work Full 9mm mouth for stable and controlled cutting Made of stainless steel Lap joint hinge for minimal wear and maximum stability Single-sided spring for ergonomic and comfortable use Extended, ergonomic handle for optimal control Suitable for autoclave and all disinfection methods Developed for intensive professional use Instructions for use Trim the nail in a controlled manner and in small increments to maintain maximum precision. Avoid excessive force. Clean and sterilize the nail clippers after each use, following the hygiene protocol. Specifications / Technical information Type: professional nail clipper Model: N-03 Mouth: full mouth Jaw width: 9 mm Material: stainless steel Hinge: lap joint (not recessed) Spring: single-sided, with stainless steel screw Total length: 11 cm Weight: 53 g Sterilization: chemical, thermal, chemical-thermal (autoclave) Is this nail clipper suitable for professional use? Yes, the N-03 is designed for professional use in nail salons, pedicure practices, and medical foot care. What is the advantage of a full 9mm jaw? A full mouth provides extra stability and cutting power, ensuring nails are cut cleanly and without splitting. Is this nail clipper suitable for thickened nails? Yes, this model is suitable for normal to stronger nails. Can the nail clippers be sterilized in an autoclave? Yes, the N-03 is fully suitable for autoclave sterilization according to the recommended parameters.

Read more less

The Nghia Export Nail Clipper N-04 Full Jaw is a professional nail clipper with a 9 mm full jaw , designed for precise and controlled nail cutting . Equipped with a double-sided spring , this model is ideal for intensive professional use in nail salons, pedicure practices, and medical foot care. The nail clippers are made of high-quality surgical stainless steel , guaranteeing durability, sharpness, and hygienic working. The full 9 mm jaws provide stability and cutting power, ensuring clean, fray-free cutting. This makes the N-04 suitable for both natural and stronger nails. Thanks to the lap joint (not countersunk), material wear is significantly reduced and the pliers remain stable for extended periods without play. Compared to other connection methods, this ensures consistent precision and a long service life , even with intensive daily use. The double-sided spring , mounted on stainless steel screws, ensures a smooth and even opening of the pliers. This reduces hand strain and significantly increases working comfort. The extended, ergonomically profiled handle offers optimal grip, control, and precision with every cutting movement. At 11 cm long and weighing 57 grams , the pliers are perfectly balanced for professional use. The Nghia Export N-04 meets high hygiene requirements and is suitable for all forms of disinfection and sterilization : chemical, thermal and chemical-thermal, including autoclave. Sterilization and disinfection Autoclave: basic sterilization at 121°C for 15 minutes ; deactivation temperature 132–134°C at a pressure of 3 bar . Chemical disinfection: Use only suitable disinfectants and always strictly follow the manufacturer's recommendations. Important points of interest Steel, including stainless steel, can be damaged under improper conditions. Excessively strong solutions or excessively long disinfection times can lead to discoloration, pitting, or corrosion of the instrument. ✔ Features / Key Benefits Professional nail clippers for precise cutting Full 9mm mouth for stable and controlled cutting Made of surgical stainless steel Lap joint hinge for minimal wear and maximum stability Double-sided spring for smooth and even operation Extended, ergonomic handle for optimum working comfort Suitable for autoclave and all disinfection methods Designed for intensive professional use Instructions for use Use the nail clippers to trim nails in a controlled, step-by-step manner. Do not apply excessive force. Clean and sterilize the clippers after each use according to the established hygiene protocol. Specifications / Technical information Type: professional nail clipper Model: N-04 Mouth: full mouth Jaw width: 9 mm Material: stainless steel Hinge: lap joint (not recessed) Spring: double-sided, mounted on stainless steel screws Total length: 11 cm Weight: 57 g Sterilization: chemical, thermal, chemical-thermal (autoclave) Is this nail clipper suitable for professional use? Yes, the N-04 is specially designed for pedicures, nail technicians and medical podiatrists. What is the advantage of a double-sided spring? A double-sided spring ensures smooth opening and closing, increasing control and reducing hand fatigue. Is this nail clipper suitable for thickened nails? Yes, the full 9mm jaw is suitable for normal to stronger nails. Can the nail clippers be sterilized in an autoclave? Yes, the N-04 is fully suitable for autoclave sterilization according to the recommended parameters.

Read more less

The Nghia Export Nail Clipper N-07 Full Jaw is a professional nail clipper with a 14 mm full jaw , specially designed for precisely cutting ingrown toenails and hard, thickened nails. This instrument is designed for intensive use in pedicure practices, podiatry salons, and medical foot care, where maximum control, strength, and safety are required. The nail clippers are made of high-quality, surgical-grade stainless steel . Thanks to the full jaws (14 mm) , the nail can be cut in a single, fluid motion, without splitting or fraying. This makes the clippers particularly suitable for problem nails, including ingrown nails and severely thickened nail plates. The lap joint (non-recessed hinge) minimizes material wear and prevents play, ensuring long life and consistent precision . Combined with the single-sided spring , secured with a stainless steel screw, the N-07 offers smooth, controlled operation with minimal hand strain. The extended, ergonomically profiled handle fits securely in your hand and guarantees maximum precision and comfort, even during extended sessions. With a total length of 11.5 cm and a weight of 58 grams , this nail clipper is perfectly balanced for professional use. The Nghia Export N-07 meets strict hygiene requirements and is suitable for all forms of disinfection and sterilization : chemical, thermal and chemical-thermal, including autoclave. Sterilization and disinfection Autoclave: basic sterilization at 121°C for 15 minutes ; deactivation temperature 132–134°C at a pressure of 3 bar . Chemical disinfection: use only with the appropriate agents and always in accordance with the manufacturer's instructions. Important points of interest Steel, including stainless steel, can be damaged by improper use or disinfection. Solutions that are too strong or disinfection times that are too long can lead to discoloration, pitting, or corrosion of the instrument. ✔ Features / Key Benefits Professional nail clippers for ingrown nails Full 14mm mouth for powerful and controlled cutting Made of surgical stainless steel Lap joint hinge for minimal wear and maximum stability Single-sided spring for smooth and ergonomic operation Extended, ergonomic handle for precision and comfort Suitable for autoclave and all disinfection methods Designed for intensive professional use Instructions for use Use the nail clippers to trim ingrown or thickened nails in a controlled manner. Work in small, precise strokes and avoid excessive force. Clean and sterilize the instrument after each treatment according to the established hygiene protocol. Specifications / Technical information Type: professional nail clipper Model: N-07 Mouth: full mouth Jaw width: 14 mm Material: stainless steel Hinge: lap joint (not recessed) Spring: single-sided, with stainless steel screw Total length: 11.5 cm Weight: 58 g Sterilization: chemical, thermal, chemical-thermal (autoclave) Is this nail clipper suitable for ingrown nails? Yes, the N-07 is specially designed for the safe and precise cutting of ingrown and thickened nails. What does “full mouth” mean on nail clippers? A full beak provides extra cutting power and stability, ideal for hard or problem nails. Is this instrument suitable for professional use? Yes, this nail clipper is designed for pedicures, podiatrists and medical foot care professionals. Can the nail clippers be sterilized in an autoclave? Yes, the N-07 is fully suitable for autoclave sterilization according to the recommended parameters. How are these pliers different from standard nail nippers? The combination of a full jaw, lap joint hinge and ergonomic handle provides greater precision, power and durability.

Read more less

The Nghia Export Eyebrow Scissors ES-01 are professional precision scissors with a narrow, slightly curved blade , specially designed for precise eyebrow shaping and other fine detail work. Their lightweight and ergonomic design offer maximum control and comfort, even during prolonged, precise work. The narrow, slightly curved blade makes it easy to follow the natural shape of your eyebrows and remove excess hairs in a controlled manner. This allows you to achieve a clean, symmetrical, and professional result without unnecessary risk of slipping. These eyebrow scissors are ideal for use in beauty salons, brow bars, and cosmetic practices. The Nghia Export ES-01 is crafted from high-quality polished stainless steel , a material also used in surgical instruments. This guarantees a long service life, excellent corrosion resistance, and a smooth, consistent cutting action. The riveted connection ensures stability and reliability, even under intensive professional use. Hygiene is essential for professionals. Therefore, these scissors are suitable for all forms of disinfection and sterilization : chemical, thermal, and chemical-thermal. This allows them to be seamlessly integrated into strict salon and practice protocols. Sterilization and disinfection Autoclave: basic sterilization at 121°C for 15 minutes ; deactivation temperature 132–134°C at a pressure of 3 bar . Chemical disinfection: Use only agents intended for this purpose and always follow the manufacturer's recommendations. Important points of interest Steel, including stainless steel, can be damaged under improper conditions. Excessively strong solutions or excessively long disinfection times can lead to discoloration, pitting, or corrosion of the instrument. ✔ Features / Key Benefits Professional eyebrow scissors for precision work Narrow, slightly curved blade for controlled and precise cutting Made of polished stainless steel (professional quality) Riveted connection for durability and stability Lightweight design for optimal working comfort Suitable for all sterilization and disinfection methods Instructions for use Use the scissors with small, controlled scissor strokes to trim excess eyebrow hairs. Follow the natural shape of your eyebrow for a clean result. Clean and disinfect or sterilize the scissors immediately after use, following salon protocol. Specifications / Technical information Type: professional eyebrow scissors Model: ES-01 Material: Polished stainless steel Leaf type: narrow, slightly curved Blade length: 20 mm Total length: 9.5 cm Connection: riveted Weight: 10 g Sterilization: chemical, thermal, chemical-thermal (including autoclave) Additional information The combination of a slightly curved blade, compact size, and very low weight makes these scissors perfect for precise brow styling. A reliable choice for professionals who strive for perfect detail, hygiene, and control. Are these scissors specifically intended for eyebrows? Yes, the ES-01 is specifically designed for precise and safe eyebrow shaping. What is the advantage of a slightly curved blade? A slightly curved blade better follows the natural shape of the eyebrow and increases precision. Can these scissors be sterilized in an autoclave? Yes, the scissors are suitable for autoclave sterilization according to the recommended parameters. Is this instrument suitable for professional use? Yes, the ES-01 eyebrow scissors are designed for intensive professional use in salons and cosmetic practices.

Read more less

The Nghia Export ES-03 Professional Scissors are compact precision scissors with a narrow, slightly curved blade , specially designed for precise detail work such as eyebrow shaping and other delicate cosmetic procedures. The subtle curvature of the blade allows for controlled work, effortlessly following the natural contours of the skin. These professional scissors are ideal for situations where precision is essential. The narrow, slightly curved blade allows for extremely precise hair cutting without unnecessary pressure or risk of slipping. This ensures a clean and neat result, perfect for brow styling and fine detail work in beauty salons. The Nghia Export ES-03 is crafted from high-quality polished stainless steel , a material also used in surgical instruments. This guarantees durability, corrosion resistance, and a smooth, consistent cutting action. The riveted connection ensures stability and long-term reliability, even under intensive professional use. Hygiene is paramount in professional work. Therefore, these scissors are suitable for all forms of disinfection and sterilization : chemical, thermal, and chemical-thermal. This makes the ES-03 perfect for use in salons and practices with strict hygiene requirements. Sterilization and disinfection Autoclave: basic sterilization at 121°C for 15 minutes ; deactivation temperature 132–134°C at a pressure of 3 bar . Chemical disinfection: Use only agents intended for this purpose and always follow the manufacturer's recommendations. Important points of interest Steel, including stainless steel, can be damaged under improper conditions. Excessively strong solutions or excessively long disinfection times can lead to discoloration, pitting, or corrosion of the instrument. ✔ Features / Key Benefits Professional scissors for eyebrows and precision work Narrow, slightly curved blade for controlled and precise cutting Made of polished stainless steel (professional quality) Riveted connection for stability and durability Lightweight design for comfort during extended use Suitable for all sterilization and disinfection methods Instructions for use Use the scissors with small, controlled scissor strokes when grooming eyebrows or other delicate areas. The slight curvature of the blade allows you to work precisely along the natural contours. Clean and disinfect or sterilize the scissors immediately after use according to established salon protocols. Specifications / Technical information Type: professional cosmetic scissors Model: ES-03 Material: Polished stainless steel Leaf type: narrow, slightly curved Blade length: 14 mm Total length: 9.5 cm Connection: riveted Weight: 14 g Sterilization: chemical, thermal, chemical-thermal (including autoclave) Additional information Their compact size, light weight, and curved blade make these shears particularly comfortable to use for detailed work. An excellent choice for professionals who want precision, control, and hygiene combined in a single, reliable tool. Are these scissors suitable for eyebrows? Yes, the ES-03 is specifically designed for precision eyebrow trimming and other fine detail work. What is the advantage of a slightly curved blade? A slightly curved blade follows natural contours better, which provides greater control and precision. Can the scissors be sterilized in an autoclave? Yes, the scissors are suitable for autoclave sterilization according to the recommended parameters. Are these scissors suitable for professional use? Yes, this instrument is designed for intensive use in salons and cosmetic practices.

Read more less

The Nghia Export ES-04 Professional Scissors are compact and extremely precise scissors, specially designed for safe and controlled cutting of hair in sensitive and hard-to-reach areas like the nose and ears, as well as for shaping eyebrows . This instrument is ideal for professional use in beauty salons, brow bars, barbershops, and cosmetic practices. The scissors feature a narrow, straight cutting blade with a softly rounded ball point , also known as a safety blade . This ball point significantly increases safety and reduces the risk of punctures or cuts, which is essential when working close to the skin and in delicate areas. The Nghia Export ES-04 is crafted from high-quality brushed stainless steel . This material, also used for surgical instruments, guarantees durability, corrosion resistance, and a smooth cutting action. The riveted connection ensures stability and reliable operation, even with frequent professional use. Hygiene plays a crucial role in any professional work environment. Therefore, these scissors are fully compatible with all forms of disinfection and sterilization : chemical, thermal, and chemical-thermal. This allows the ES-04 to be seamlessly integrated into strict salon and practice protocols. Sterilization and disinfection Autoclave: basic sterilization at 121°C for 15 minutes ; deactivation temperature 132–134°C at a pressure of 3 bar . Chemical disinfection: use only the appropriate disinfectant and always follow the manufacturer's recommendations. Important points of interest Steel, including stainless steel, can be damaged under improper conditions. Disinfectant solutions that are too strong or leave on for too long can lead to discoloration, pitting, or corrosion of the instrument. ✔ Features / Key Benefits Professional scissors for nose, ear and eyebrow hair Narrow, straight blade for maximum precision Ballpoint pen (safety data sheet) for safe working close to the skin Made of brushed stainless steel (professional quality) Riveted connection for stability and durability Suitable for all sterilization and disinfection methods Instructions for use Use the scissors with small, controlled cutting strokes when removing or trimming hair in sensitive areas. The ball point allows you to work safely and precisely without risk of skin damage. Clean and disinfect or sterilize the scissors immediately after use according to established salon protocols. Specifications / Technical information Type: professional cosmetic scissors Model: ES-04 Material: brushed stainless steel Blade type: narrow, straight, ball point (safety blade) Blade length: 19 mm Total length: 9 cm Connection: riveted Weight: 10 g Sterilization: chemical, thermal, chemical-thermal (including autoclave) Additional information Their light weight, short blade, and safe ball point make these scissors exceptionally comfortable to use and perfect for detailed work. An indispensable tool for professionals who want to combine safety, precision, and hygiene in a single, reliable tool. Are these scissors suitable for nose and ear hair? Yes, the Nghia Export ES-04 is specially designed for safely cutting hair in the nose and ears. Can I also use this to fill in my eyebrows? Yes, the narrow blade makes these scissors very suitable for precisely shaping eyebrows. Can the scissors be sterilized in an autoclave? Yes, the scissors are suitable for autoclave sterilization according to the recommended parameters. Why is a ballpoint important? The ball point increases safety and reduces the risk of injury when working close to the skin.

Read more less

The Nghia Export ES-05 Professional Scissors are ultra-precise, compact scissors with a narrow blade, specially designed for fine, controlled detail work. These professional scissors are ideal for eyebrow shaping and other precise cosmetic procedures where safety, control, and precision are paramount. Thanks to the narrow, straight cutting blade with a softly rounded ball point (safety blade) , these scissors are perfect for working close to the skin. The ball point significantly reduces the risk of punctures or cuts, making the ES-05 ideal for professional use in beauty salons, brow bars, and cosmetic practices. The scissors are crafted from high-quality polished stainless steel , a material also used in surgical instruments. This ensures excellent durability, long-lasting sharpness, and a smooth, comfortable cutting action. The riveted joint guarantees stability and consistent performance, even with intensive daily use. Hygiene is essential in any professional environment. Therefore, the Nghia Export ES-05 is fully compatible with all forms of disinfection and sterilization : chemical, thermal, and chemical-thermal. This makes the scissors a reliable choice for salons and professionals who work according to strict hygiene protocols. Sterilization and disinfection Autoclave: basic sterilization at 121°C for 15 minutes ; deactivation temperature 132–134°C at a pressure of 3 bar . Chemical disinfection: use only the appropriate disinfectant and always follow the manufacturer's recommendations. Important points of interest Steel, including stainless steel, can be damaged under improper conditions. Disinfectant solutions that are too strong or leave on for too long can lead to discoloration, pitting, or corrosion of the instrument. ✔ Features / Key Benefits Professional scissors for eyebrows and fine detail work Narrow, straight blade for maximum precision Safety blade with ball point for extra skin protection Made of polished stainless steel (professional quality) Riveted connection for stability and durability Suitable for all sterilization and disinfection methods Instructions for use Use the scissors with light, controlled scissor strokes when trimming eyebrows or other delicate areas. The ball point allows you to work safely close to the skin. Clean and disinfect or sterilize the scissors immediately after use according to established salon protocols. Specifications / Technical information Type: professional cosmetic scissors Model: ES-05 Material: Polished stainless steel Blade type: narrow, straight, ball point (safety blade) Blade length: 30 mm Total length: 9 cm Connection: riveted Weight: 15 g Sterilization: chemical, thermal, chemical-thermal (including autoclave) Additional information Their light weight, narrow blade, and safe ball point make these scissors exceptionally comfortable to use and ideal for long-term precision work. An indispensable tool for professionals who strive for control, safety, and a perfect finish. Are these scissors suitable for eyebrows? Yes, the Nghia Export ES-05 is specially designed for precise eyebrow shaping. What is the advantage of a ballpoint pen? The ball point increases safety and reduces the risk of punctures or cuts when working close to the skin. Can I sterilize these scissors in an autoclave? Yes, the scissors are suitable for autoclave sterilization according to the recommended parameters. Are these scissors suitable for professional use? Yes, this instrument is designed for intensive professional use in salons and cosmetic practices.

Read more less

The Nghia Export Nail Clipper NC-01 is a professional, powerful nail clipper with a straight blade , designed for precise and controlled cutting of both hand and toenails. Its larger size and solid construction make this model particularly suitable for intensive professional use in nail salons, pedicure practices, and medical settings. Thanks to the specially profiled straight blade, the nail is left with a perfectly straight and smooth edge after cutting. This helps prevent splitting and fraying and creates a clean base for further nail care or styling. The straight cutting edge is ideal for professionals who want maximum control when defining the nail shape. The Nghia Export NC-01 is crafted from lightly brushed stainless steel , a material also used for surgical instruments. This guarantees high wear resistance, excellent corrosion resistance, and a long service life. Its heavier weight and robust construction provide extra stability and strength, which is especially beneficial when cutting thicker nails. Hygiene is essential for professional use. Therefore, this nail clipper can be safely disinfected and sterilized using any method : chemical, thermal, and chemical-thermal. This makes the NC-01 a reliable choice for salons and practices that operate according to strict hygiene protocols. Sterilization and disinfection Autoclave: basic sterilization at 121°C for 15 minutes ; deactivation temperature 132–134°C at a pressure of 3 bar . Chemical disinfection: Use only agents intended for this purpose and always follow the manufacturer's recommendations. Important points of interest Steel, including stainless steel, can be damaged under improper conditions. Excessively strong solutions or excessively long disinfection times can lead to discoloration, pitting, or corrosion of the instrument. ✔ Features / Key Benefits Professional nail clippers for hand and toenails Straight cutting blade for a clean and controlled cutting result Specially profiled blade for a smooth, straight nail edge Larger and heavier model for extra strength and stability Made of lightly brushed stainless steel (surgical grade) Suitable for all sterilization and disinfection methods Instructions for use Place the nail straight on the cutting edge and clip with even, controlled pressure. For thicker nails, it's best to work in a few steps. Clean and disinfect or sterilize the nail clippers immediately after use, following salon protocol. Specifications / Technical information Type: nail clipper Model: NC-01 Material: lightly brushed stainless steel Blade type: straight Blade length: 13 mm Total length: 8 cm Weight: 40 g Sterilization: chemical, thermal, chemical-thermal (including autoclave) Additional information The larger size and straight blade make these nail clippers ideal for professionals who perform frequent pedicures or regularly work with thicker nails. A reliable tool that combines power, precision, and hygiene. Is this nail clipper suitable for both hands and feet? Yes, the Nghia Export Nail Clipper NC-01 is designed for cutting both hand and toenails. What is the advantage of a straight cutting blade? A straight cutting blade gives maximum control and ensures a clean, straight nail edge. Can I sterilize the NC-01 in an autoclave? Yes, the nail clipper is suitable for autoclave sterilization according to the recommended parameters. Who is this model most suitable for? This model is ideal for pedicures and salons that regularly treat thicker or harder nails and need extra strength.

Read more less