The Nghia Export Nail Clipper N-03 Full Jaw is a professional nail clipper with a 9 mm full jaw , designed for precise, controlled, and safe nail cutting . This model is specifically designed for professional use in nail salons, pedicure practices, and medical foot care, where reliability, precision, and ergonomics are essential. The nail clippers are made of high-quality, surgical-grade stainless steel . The full jaws (9 mm) offer excellent stability and cutting power, ensuring a clean, unfrayed cut. This makes the N-03 suitable for both natural and stronger nails. The lap joint (non-recessed) reduces material wear and prevents play during use. Compared to other joining methods, this ensures consistent precision and a long service life , even with intensive daily use. The single-sided spring , mounted on a stainless steel screw, ensures controlled and smooth operation. This reduces hand fatigue and significantly increases working comfort. The extended, ergonomically profiled handle fits securely in the hand and offers maximum control and precision. At 11 cm long and weighing 53 grams , this nail clipper is perfectly balanced for professional use. The Nghia Export N-03 meets high hygiene standards and is suitable for all forms of disinfection and sterilization : chemical, thermal and chemical-thermal, including autoclave. Sterilization and disinfection Autoclave: basic sterilization at 121°C for 15 minutes ; deactivation temperature 132–134°C at a pressure of 3 bar . Chemical disinfection: Use only suitable disinfectants and always follow the manufacturer's recommendations. Important points of interest Steel, including stainless steel, can be damaged under improper conditions. Disinfectant solutions that are too strong or leave on for too long can lead to discoloration, pitting, or corrosion of the instrument. ✔ Features / Key Benefits Professional nail clippers for precise cutting work Full 9mm mouth for stable and controlled cutting Made of stainless steel Lap joint hinge for minimal wear and maximum stability Single-sided spring for ergonomic and comfortable use Extended, ergonomic handle for optimal control Suitable for autoclave and all disinfection methods Developed for intensive professional use Instructions for use Trim the nail in a controlled manner and in small increments to maintain maximum precision. Avoid excessive force. Clean and sterilize the nail clippers after each use, following the hygiene protocol. Specifications / Technical information Type: professional nail clipper Model: N-03 Mouth: full mouth Jaw width: 9 mm Material: stainless steel Hinge: lap joint (not recessed) Spring: single-sided, with stainless steel screw Total length: 11 cm Weight: 53 g Sterilization: chemical, thermal, chemical-thermal (autoclave) Is this nail clipper suitable for professional use? Yes, the N-03 is designed for professional use in nail salons, pedicure practices, and medical foot care. What is the advantage of a full 9mm jaw? A full mouth provides extra stability and cutting power, ensuring nails are cut cleanly and without splitting. Is this nail clipper suitable for thickened nails? Yes, this model is suitable for normal to stronger nails. Can the nail clippers be sterilized in an autoclave? Yes, the N-03 is fully suitable for autoclave sterilization according to the recommended parameters.

Read more less

The Nghia Export Nail Clipper N-04 Full Jaw is a professional nail clipper with a 9 mm full jaw , designed for precise and controlled nail cutting . Equipped with a double-sided spring , this model is ideal for intensive professional use in nail salons, pedicure practices, and medical foot care. The nail clippers are made of high-quality surgical stainless steel , guaranteeing durability, sharpness, and hygienic working. The full 9 mm jaws provide stability and cutting power, ensuring clean, fray-free cutting. This makes the N-04 suitable for both natural and stronger nails. Thanks to the lap joint (not countersunk), material wear is significantly reduced and the pliers remain stable for extended periods without play. Compared to other connection methods, this ensures consistent precision and a long service life , even with intensive daily use. The double-sided spring , mounted on stainless steel screws, ensures a smooth and even opening of the pliers. This reduces hand strain and significantly increases working comfort. The extended, ergonomically profiled handle offers optimal grip, control, and precision with every cutting movement. At 11 cm long and weighing 57 grams , the pliers are perfectly balanced for professional use. The Nghia Export N-04 meets high hygiene requirements and is suitable for all forms of disinfection and sterilization : chemical, thermal and chemical-thermal, including autoclave. Sterilization and disinfection Autoclave: basic sterilization at 121°C for 15 minutes ; deactivation temperature 132–134°C at a pressure of 3 bar . Chemical disinfection: Use only suitable disinfectants and always strictly follow the manufacturer's recommendations. Important points of interest Steel, including stainless steel, can be damaged under improper conditions. Excessively strong solutions or excessively long disinfection times can lead to discoloration, pitting, or corrosion of the instrument. ✔ Features / Key Benefits Professional nail clippers for precise cutting Full 9mm mouth for stable and controlled cutting Made of surgical stainless steel Lap joint hinge for minimal wear and maximum stability Double-sided spring for smooth and even operation Extended, ergonomic handle for optimum working comfort Suitable for autoclave and all disinfection methods Designed for intensive professional use Instructions for use Use the nail clippers to trim nails in a controlled, step-by-step manner. Do not apply excessive force. Clean and sterilize the clippers after each use according to the established hygiene protocol. Specifications / Technical information Type: professional nail clipper Model: N-04 Mouth: full mouth Jaw width: 9 mm Material: stainless steel Hinge: lap joint (not recessed) Spring: double-sided, mounted on stainless steel screws Total length: 11 cm Weight: 57 g Sterilization: chemical, thermal, chemical-thermal (autoclave) Is this nail clipper suitable for professional use? Yes, the N-04 is specially designed for pedicures, nail technicians and medical podiatrists. What is the advantage of a double-sided spring? A double-sided spring ensures smooth opening and closing, increasing control and reducing hand fatigue. Is this nail clipper suitable for thickened nails? Yes, the full 9mm jaw is suitable for normal to stronger nails. Can the nail clippers be sterilized in an autoclave? Yes, the N-04 is fully suitable for autoclave sterilization according to the recommended parameters.

Read more less

The Nghia Export Nail Clipper N-07 Full Jaw is a professional nail clipper with a 14 mm full jaw , specially designed for precisely cutting ingrown toenails and hard, thickened nails. This instrument is designed for intensive use in pedicure practices, podiatry salons, and medical foot care, where maximum control, strength, and safety are required. The nail clippers are made of high-quality, surgical-grade stainless steel . Thanks to the full jaws (14 mm) , the nail can be cut in a single, fluid motion, without splitting or fraying. This makes the clippers particularly suitable for problem nails, including ingrown nails and severely thickened nail plates. The lap joint (non-recessed hinge) minimizes material wear and prevents play, ensuring long life and consistent precision . Combined with the single-sided spring , secured with a stainless steel screw, the N-07 offers smooth, controlled operation with minimal hand strain. The extended, ergonomically profiled handle fits securely in your hand and guarantees maximum precision and comfort, even during extended sessions. With a total length of 11.5 cm and a weight of 58 grams , this nail clipper is perfectly balanced for professional use. The Nghia Export N-07 meets strict hygiene requirements and is suitable for all forms of disinfection and sterilization : chemical, thermal and chemical-thermal, including autoclave. Sterilization and disinfection Autoclave: basic sterilization at 121°C for 15 minutes ; deactivation temperature 132–134°C at a pressure of 3 bar . Chemical disinfection: use only with the appropriate agents and always in accordance with the manufacturer's instructions. Important points of interest Steel, including stainless steel, can be damaged by improper use or disinfection. Solutions that are too strong or disinfection times that are too long can lead to discoloration, pitting, or corrosion of the instrument. ✔ Features / Key Benefits Professional nail clippers for ingrown nails Full 14mm mouth for powerful and controlled cutting Made of surgical stainless steel Lap joint hinge for minimal wear and maximum stability Single-sided spring for smooth and ergonomic operation Extended, ergonomic handle for precision and comfort Suitable for autoclave and all disinfection methods Designed for intensive professional use Instructions for use Use the nail clippers to trim ingrown or thickened nails in a controlled manner. Work in small, precise strokes and avoid excessive force. Clean and sterilize the instrument after each treatment according to the established hygiene protocol. Specifications / Technical information Type: professional nail clipper Model: N-07 Mouth: full mouth Jaw width: 14 mm Material: stainless steel Hinge: lap joint (not recessed) Spring: single-sided, with stainless steel screw Total length: 11.5 cm Weight: 58 g Sterilization: chemical, thermal, chemical-thermal (autoclave) Is this nail clipper suitable for ingrown nails? Yes, the N-07 is specially designed for the safe and precise cutting of ingrown and thickened nails. What does “full mouth” mean on nail clippers? A full beak provides extra cutting power and stability, ideal for hard or problem nails. Is this instrument suitable for professional use? Yes, this nail clipper is designed for pedicures, podiatrists and medical foot care professionals. Can the nail clippers be sterilized in an autoclave? Yes, the N-07 is fully suitable for autoclave sterilization according to the recommended parameters. How are these pliers different from standard nail nippers? The combination of a full jaw, lap joint hinge and ergonomic handle provides greater precision, power and durability.

Read more less

The Nghia Export Eyebrow Scissors ES-01 are professional precision scissors with a narrow, slightly curved blade , specially designed for precise eyebrow shaping and other fine detail work. Their lightweight and ergonomic design offer maximum control and comfort, even during prolonged, precise work. The narrow, slightly curved blade makes it easy to follow the natural shape of your eyebrows and remove excess hairs in a controlled manner. This allows you to achieve a clean, symmetrical, and professional result without unnecessary risk of slipping. These eyebrow scissors are ideal for use in beauty salons, brow bars, and cosmetic practices. The Nghia Export ES-01 is crafted from high-quality polished stainless steel , a material also used in surgical instruments. This guarantees a long service life, excellent corrosion resistance, and a smooth, consistent cutting action. The riveted connection ensures stability and reliability, even under intensive professional use. Hygiene is essential for professionals. Therefore, these scissors are suitable for all forms of disinfection and sterilization : chemical, thermal, and chemical-thermal. This allows them to be seamlessly integrated into strict salon and practice protocols. Sterilization and disinfection Autoclave: basic sterilization at 121°C for 15 minutes ; deactivation temperature 132–134°C at a pressure of 3 bar . Chemical disinfection: Use only agents intended for this purpose and always follow the manufacturer's recommendations. Important points of interest Steel, including stainless steel, can be damaged under improper conditions. Excessively strong solutions or excessively long disinfection times can lead to discoloration, pitting, or corrosion of the instrument. ✔ Features / Key Benefits Professional eyebrow scissors for precision work Narrow, slightly curved blade for controlled and precise cutting Made of polished stainless steel (professional quality) Riveted connection for durability and stability Lightweight design for optimal working comfort Suitable for all sterilization and disinfection methods Instructions for use Use the scissors with small, controlled scissor strokes to trim excess eyebrow hairs. Follow the natural shape of your eyebrow for a clean result. Clean and disinfect or sterilize the scissors immediately after use, following salon protocol. Specifications / Technical information Type: professional eyebrow scissors Model: ES-01 Material: Polished stainless steel Leaf type: narrow, slightly curved Blade length: 20 mm Total length: 9.5 cm Connection: riveted Weight: 10 g Sterilization: chemical, thermal, chemical-thermal (including autoclave) Additional information The combination of a slightly curved blade, compact size, and very low weight makes these scissors perfect for precise brow styling. A reliable choice for professionals who strive for perfect detail, hygiene, and control. Are these scissors specifically intended for eyebrows? Yes, the ES-01 is specifically designed for precise and safe eyebrow shaping. What is the advantage of a slightly curved blade? A slightly curved blade better follows the natural shape of the eyebrow and increases precision. Can these scissors be sterilized in an autoclave? Yes, the scissors are suitable for autoclave sterilization according to the recommended parameters. Is this instrument suitable for professional use? Yes, the ES-01 eyebrow scissors are designed for intensive professional use in salons and cosmetic practices.

Read more less

The Nghia Export ES-03 Professional Scissors are compact precision scissors with a narrow, slightly curved blade , specially designed for precise detail work such as eyebrow shaping and other delicate cosmetic procedures. The subtle curvature of the blade allows for controlled work, effortlessly following the natural contours of the skin. These professional scissors are ideal for situations where precision is essential. The narrow, slightly curved blade allows for extremely precise hair cutting without unnecessary pressure or risk of slipping. This ensures a clean and neat result, perfect for brow styling and fine detail work in beauty salons. The Nghia Export ES-03 is crafted from high-quality polished stainless steel , a material also used in surgical instruments. This guarantees durability, corrosion resistance, and a smooth, consistent cutting action. The riveted connection ensures stability and long-term reliability, even under intensive professional use. Hygiene is paramount in professional work. Therefore, these scissors are suitable for all forms of disinfection and sterilization : chemical, thermal, and chemical-thermal. This makes the ES-03 perfect for use in salons and practices with strict hygiene requirements. Sterilization and disinfection Autoclave: basic sterilization at 121°C for 15 minutes ; deactivation temperature 132–134°C at a pressure of 3 bar . Chemical disinfection: Use only agents intended for this purpose and always follow the manufacturer's recommendations. Important points of interest Steel, including stainless steel, can be damaged under improper conditions. Excessively strong solutions or excessively long disinfection times can lead to discoloration, pitting, or corrosion of the instrument. ✔ Features / Key Benefits Professional scissors for eyebrows and precision work Narrow, slightly curved blade for controlled and precise cutting Made of polished stainless steel (professional quality) Riveted connection for stability and durability Lightweight design for comfort during extended use Suitable for all sterilization and disinfection methods Instructions for use Use the scissors with small, controlled scissor strokes when grooming eyebrows or other delicate areas. The slight curvature of the blade allows you to work precisely along the natural contours. Clean and disinfect or sterilize the scissors immediately after use according to established salon protocols. Specifications / Technical information Type: professional cosmetic scissors Model: ES-03 Material: Polished stainless steel Leaf type: narrow, slightly curved Blade length: 14 mm Total length: 9.5 cm Connection: riveted Weight: 14 g Sterilization: chemical, thermal, chemical-thermal (including autoclave) Additional information Their compact size, light weight, and curved blade make these shears particularly comfortable to use for detailed work. An excellent choice for professionals who want precision, control, and hygiene combined in a single, reliable tool. Are these scissors suitable for eyebrows? Yes, the ES-03 is specifically designed for precision eyebrow trimming and other fine detail work. What is the advantage of a slightly curved blade? A slightly curved blade follows natural contours better, which provides greater control and precision. Can the scissors be sterilized in an autoclave? Yes, the scissors are suitable for autoclave sterilization according to the recommended parameters. Are these scissors suitable for professional use? Yes, this instrument is designed for intensive use in salons and cosmetic practices.

Read more less

The Nghia Export ES-04 Professional Scissors are compact and extremely precise scissors, specially designed for safe and controlled cutting of hair in sensitive and hard-to-reach areas like the nose and ears, as well as for shaping eyebrows . This instrument is ideal for professional use in beauty salons, brow bars, barbershops, and cosmetic practices. The scissors feature a narrow, straight cutting blade with a softly rounded ball point , also known as a safety blade . This ball point significantly increases safety and reduces the risk of punctures or cuts, which is essential when working close to the skin and in delicate areas. The Nghia Export ES-04 is crafted from high-quality brushed stainless steel . This material, also used for surgical instruments, guarantees durability, corrosion resistance, and a smooth cutting action. The riveted connection ensures stability and reliable operation, even with frequent professional use. Hygiene plays a crucial role in any professional work environment. Therefore, these scissors are fully compatible with all forms of disinfection and sterilization : chemical, thermal, and chemical-thermal. This allows the ES-04 to be seamlessly integrated into strict salon and practice protocols. Sterilization and disinfection Autoclave: basic sterilization at 121°C for 15 minutes ; deactivation temperature 132–134°C at a pressure of 3 bar . Chemical disinfection: use only the appropriate disinfectant and always follow the manufacturer's recommendations. Important points of interest Steel, including stainless steel, can be damaged under improper conditions. Disinfectant solutions that are too strong or leave on for too long can lead to discoloration, pitting, or corrosion of the instrument. ✔ Features / Key Benefits Professional scissors for nose, ear and eyebrow hair Narrow, straight blade for maximum precision Ballpoint pen (safety data sheet) for safe working close to the skin Made of brushed stainless steel (professional quality) Riveted connection for stability and durability Suitable for all sterilization and disinfection methods Instructions for use Use the scissors with small, controlled cutting strokes when removing or trimming hair in sensitive areas. The ball point allows you to work safely and precisely without risk of skin damage. Clean and disinfect or sterilize the scissors immediately after use according to established salon protocols. Specifications / Technical information Type: professional cosmetic scissors Model: ES-04 Material: brushed stainless steel Blade type: narrow, straight, ball point (safety blade) Blade length: 19 mm Total length: 9 cm Connection: riveted Weight: 10 g Sterilization: chemical, thermal, chemical-thermal (including autoclave) Additional information Their light weight, short blade, and safe ball point make these scissors exceptionally comfortable to use and perfect for detailed work. An indispensable tool for professionals who want to combine safety, precision, and hygiene in a single, reliable tool. Are these scissors suitable for nose and ear hair? Yes, the Nghia Export ES-04 is specially designed for safely cutting hair in the nose and ears. Can I also use this to fill in my eyebrows? Yes, the narrow blade makes these scissors very suitable for precisely shaping eyebrows. Can the scissors be sterilized in an autoclave? Yes, the scissors are suitable for autoclave sterilization according to the recommended parameters. Why is a ballpoint important? The ball point increases safety and reduces the risk of injury when working close to the skin.

Read more less

The Nghia Export ES-05 Professional Scissors are ultra-precise, compact scissors with a narrow blade, specially designed for fine, controlled detail work. These professional scissors are ideal for eyebrow shaping and other precise cosmetic procedures where safety, control, and precision are paramount. Thanks to the narrow, straight cutting blade with a softly rounded ball point (safety blade) , these scissors are perfect for working close to the skin. The ball point significantly reduces the risk of punctures or cuts, making the ES-05 ideal for professional use in beauty salons, brow bars, and cosmetic practices. The scissors are crafted from high-quality polished stainless steel , a material also used in surgical instruments. This ensures excellent durability, long-lasting sharpness, and a smooth, comfortable cutting action. The riveted joint guarantees stability and consistent performance, even with intensive daily use. Hygiene is essential in any professional environment. Therefore, the Nghia Export ES-05 is fully compatible with all forms of disinfection and sterilization : chemical, thermal, and chemical-thermal. This makes the scissors a reliable choice for salons and professionals who work according to strict hygiene protocols. Sterilization and disinfection Autoclave: basic sterilization at 121°C for 15 minutes ; deactivation temperature 132–134°C at a pressure of 3 bar . Chemical disinfection: use only the appropriate disinfectant and always follow the manufacturer's recommendations. Important points of interest Steel, including stainless steel, can be damaged under improper conditions. Disinfectant solutions that are too strong or leave on for too long can lead to discoloration, pitting, or corrosion of the instrument. ✔ Features / Key Benefits Professional scissors for eyebrows and fine detail work Narrow, straight blade for maximum precision Safety blade with ball point for extra skin protection Made of polished stainless steel (professional quality) Riveted connection for stability and durability Suitable for all sterilization and disinfection methods Instructions for use Use the scissors with light, controlled scissor strokes when trimming eyebrows or other delicate areas. The ball point allows you to work safely close to the skin. Clean and disinfect or sterilize the scissors immediately after use according to established salon protocols. Specifications / Technical information Type: professional cosmetic scissors Model: ES-05 Material: Polished stainless steel Blade type: narrow, straight, ball point (safety blade) Blade length: 30 mm Total length: 9 cm Connection: riveted Weight: 15 g Sterilization: chemical, thermal, chemical-thermal (including autoclave) Additional information Their light weight, narrow blade, and safe ball point make these scissors exceptionally comfortable to use and ideal for long-term precision work. An indispensable tool for professionals who strive for control, safety, and a perfect finish. Are these scissors suitable for eyebrows? Yes, the Nghia Export ES-05 is specially designed for precise eyebrow shaping. What is the advantage of a ballpoint pen? The ball point increases safety and reduces the risk of punctures or cuts when working close to the skin. Can I sterilize these scissors in an autoclave? Yes, the scissors are suitable for autoclave sterilization according to the recommended parameters. Are these scissors suitable for professional use? Yes, this instrument is designed for intensive professional use in salons and cosmetic practices.

Read more less

The Nghia Export Nail Clipper NC-01 is a professional, powerful nail clipper with a straight blade , designed for precise and controlled cutting of both hand and toenails. Its larger size and solid construction make this model particularly suitable for intensive professional use in nail salons, pedicure practices, and medical settings. Thanks to the specially profiled straight blade, the nail is left with a perfectly straight and smooth edge after cutting. This helps prevent splitting and fraying and creates a clean base for further nail care or styling. The straight cutting edge is ideal for professionals who want maximum control when defining the nail shape. The Nghia Export NC-01 is crafted from lightly brushed stainless steel , a material also used for surgical instruments. This guarantees high wear resistance, excellent corrosion resistance, and a long service life. Its heavier weight and robust construction provide extra stability and strength, which is especially beneficial when cutting thicker nails. Hygiene is essential for professional use. Therefore, this nail clipper can be safely disinfected and sterilized using any method : chemical, thermal, and chemical-thermal. This makes the NC-01 a reliable choice for salons and practices that operate according to strict hygiene protocols. Sterilization and disinfection Autoclave: basic sterilization at 121°C for 15 minutes ; deactivation temperature 132–134°C at a pressure of 3 bar . Chemical disinfection: Use only agents intended for this purpose and always follow the manufacturer's recommendations. Important points of interest Steel, including stainless steel, can be damaged under improper conditions. Excessively strong solutions or excessively long disinfection times can lead to discoloration, pitting, or corrosion of the instrument. ✔ Features / Key Benefits Professional nail clippers for hand and toenails Straight cutting blade for a clean and controlled cutting result Specially profiled blade for a smooth, straight nail edge Larger and heavier model for extra strength and stability Made of lightly brushed stainless steel (surgical grade) Suitable for all sterilization and disinfection methods Instructions for use Place the nail straight on the cutting edge and clip with even, controlled pressure. For thicker nails, it's best to work in a few steps. Clean and disinfect or sterilize the nail clippers immediately after use, following salon protocol. Specifications / Technical information Type: nail clipper Model: NC-01 Material: lightly brushed stainless steel Blade type: straight Blade length: 13 mm Total length: 8 cm Weight: 40 g Sterilization: chemical, thermal, chemical-thermal (including autoclave) Additional information The larger size and straight blade make these nail clippers ideal for professionals who perform frequent pedicures or regularly work with thicker nails. A reliable tool that combines power, precision, and hygiene. Is this nail clipper suitable for both hands and feet? Yes, the Nghia Export Nail Clipper NC-01 is designed for cutting both hand and toenails. What is the advantage of a straight cutting blade? A straight cutting blade gives maximum control and ensures a clean, straight nail edge. Can I sterilize the NC-01 in an autoclave? Yes, the nail clipper is suitable for autoclave sterilization according to the recommended parameters. Who is this model most suitable for? This model is ideal for pedicures and salons that regularly treat thicker or harder nails and need extra strength.

Read more less

The Nghia Export Nail Clipper NC-02 is a professional, robust nail clipper with a rounded cutting blade , specially designed for comfortable and controlled cutting of both hand and toenails. Its larger size and rounded blade make this model particularly suitable for thicker nails and intensive professional use in nail salons, pedicure practices, and medical settings. Thanks to the specially profiled, rounded blade, the nail is left with a straight, smooth edge after cutting, without fraying or splitting. The rounded cutting edge follows the natural shape of the nail, ensuring a more comfortable and safe cutting result, especially for toenails or thicker nail plates. The Nghia Export NC-02 is crafted from lightly brushed stainless steel , a type of steel also used in surgical instruments. This guarantees high wear resistance, excellent corrosion resistance, and a long service life. Its solid construction and weight provide stability and strength, making cutting thicker nails considerably easier. Hygiene is essential for professional use. Therefore, this nail clipper is suitable for all forms of disinfection and sterilization : chemical, thermal, and chemical-thermal. This makes the NC-02 a reliable choice for salons and practices that operate according to strict hygiene and safety standards. Sterilization and disinfection Autoclave: basic sterilization at 121°C for 15 minutes ; deactivation temperature 132–134°C at a pressure of 3 bar . Chemical disinfection: Use only agents intended for this purpose and always follow the manufacturer's recommendations. Important points of interest Steel, including stainless steel, can be damaged under improper conditions. Excessively strong solutions or excessively long disinfection times can lead to discoloration, pitting, or corrosion of the instrument. ✔ Features / Key Benefits Professional nail clippers for hand and toenails Rounded cutting blade for a natural, comfortable cutting shape Specially profiled blade for a smooth and straight nail edge Larger and heavier model for extra strength and stability Made of lightly brushed stainless steel (surgical grade) Suitable for all sterilization and disinfection methods Instructions for use Place the nail on the rounded cutting edge and clip with controlled, even pressure. The larger blade allows you to clip wider or thicker nails in fewer passes. Clean and disinfect or sterilize the nail clippers immediately after use, following salon protocol. Specifications / Technical information Type: nail clipper Model: NC-02 Material: lightly brushed stainless steel Leaf type: rounded Blade length: 13 mm Total length: 8 cm Weight: 40 g Sterilization: chemical, thermal, chemical-thermal (including autoclave) Additional information The larger size and rounded blade make these nail clippers particularly suitable for pedicures and for clients with thicker or harder nails. An excellent choice for professionals who want strength, control, and hygiene in one reliable tool. Is this nail clipper suitable for both hands and feet? Yes, the Nghia Export Nail Clipper NC-02 is designed for cutting both hand and toenails. What is the advantage of a rounded cutting blade? A rounded blade follows the natural nail shape better and is especially comfortable and safe when cutting toenails. Can I sterilize the NC-02 in an autoclave? Yes, the nail clipper is suitable for autoclave sterilization according to the recommended parameters. Who is this larger model most suitable for? This model is ideal for pedicures and professionals who regularly treat thicker or harder nails.

Read more less

The Nghia Export Nail Clipper NC-03 is a professional, compact nail clipper with a straight blade , designed for precise and controlled cutting of both hand and toenails. This tool is ideal for nail salons, pedicure practices, and professionals who want a clean, precise cut—without fraying, splitting, or uneven edges. The NC-03 is designed to cut nails efficiently, and thanks to its specially profiled blade, the nail is left with a perfectly straight and smooth edge . This makes the nail clipper particularly suitable for creating a neat base before filing, buffing, or applying products such as gel polish, BIAB, gel, or acrylic. Its compact size provides extra control, allowing you to perform precision work comfortably. The nail clippers are made of lightly brushed stainless steel , a material also used in the production of surgical instruments. This makes the tool not only durable and wear-resistant, but also highly resistant to intensive use and frequent cleaning. The solid construction and quality of the steel help keep the instrument sharp for a long time, ensuring consistent performance. Hygiene is crucial in professional environments. Therefore, the Nghia Export NC-03 can be disinfected and sterilized using any method : chemical, thermal, or chemical-thermal. This makes the nail clipper a reliable choice for salons that operate under strict hygiene protocols. Sterilization and disinfection Autoclave: basic sterilization at 121°C for 15 minutes ; deactivation temperature 132–134°C at a pressure of 3 bar . Chemical disinfection: Use only agents intended for this purpose and always follow the manufacturer's recommendations. Important points of interest Steel, including stainless steel, can be damaged under improper conditions. Excessively strong solutions or excessively long disinfection times can lead to discoloration, pitting, or corrosion of the instrument. ✔ Features / Key Benefits Professional nail clippers for hand and toenails Straight cutting blade for a smooth and neat cutting result Specially profiled blade for a perfectly straight nail edge Compact size for precision and control Made of lightly brushed stainless steel (surgical grade) Suitable for all sterilization and disinfection methods Instructions for use Place the nail straight on the cutting edge and clip with controlled pressure. Work in small increments to maintain maximum precision and reduce tension on the nail. Clean and disinfect/sterilize the nail clippers immediately after use, following salon protocol. Specifications / Technical information Type: nail clipper Model: NC-03 Material: lightly brushed stainless steel Blade type: straight Blade length: 11 mm Total length: 5.6 cm Weight: 26 g Sterilization: chemical, thermal, chemical-thermal (including autoclave) Additional information This compact nail clipper is a powerful choice for professionals who want to work quickly and precisely without compromising hygiene. Its straight blade makes it particularly suitable for creating a neat, straight nail shape – ideal as a base for further care or nail styling. Is this nail clipper suitable for both hands and feet? Yes, the Nghia Export Nail Clipper NC-03 is designed for cutting both hand and toenails. What is the advantage of a straight cutting blade? A straight cutting blade provides a clean, smooth edge and helps prevent fraying or splitting of the nail. Can I sterilize the NC-03 in an autoclave? Yes, the nail clipper is suitable for autoclave sterilization according to the recommended parameters (121°C/15 min; 132–134°C; 3 bar). Why is stainless steel important for professional use? Stainless steel is wear-resistant, corrosion-resistant and suitable for repeated cleaning and sterilization, ensuring the instrument remains reliable. Is this instrument suitable for professional salon use? Yes, the NC-03 is intended for intensive use in salons and pedicure practices with high hygiene requirements.

Read more less

The Nghia Export Metal Hoof P-01 is a professional manicure and pedicure tool designed for extremely precise preparation and cleaning of the nail plate. This metal hoof is ideal for nail technicians, pedicurists, and salons who want a clean, hygienic, and efficient work environment—with maximum control when removing cuticles and product residue. The tool is used to neatly treat the epidermis/cuticle area: you can gently push back the skin and then precisely remove cuticles, flakes, and membranes . The Nghia Export P-01 is also ideal for the controlled removal of gel and acrylic residue from the nail plate and nail itself. This creates a clean base for any treatment, from a classic manicure to BIAB, gel polish, or acrylic. The Nghia Export P-01 is made of polished stainless steel – a type of steel also used in the production of surgical instruments. This means high wear resistance, strong corrosion resistance, and a finish that feels comfortable during professional use. The gently recessed, non-slip handle prevents slippage and ensures a stable grip, even during precision work or when wearing gloves. What makes this metal hoof trimmer particularly practical are its two different precision tips . You have a pointed tip for precise details and access to narrow areas, and a rectangular, sharp tip for controlled cleaning and removing stubborn residue. This allows you to work quickly and precisely, without unnecessary pressure on the natural nail. Hygiene is essential in any professional environment. Therefore, this tool is designed to be safely disinfected and sterilized by any method : chemical, thermal, or chemical-thermal. This makes the Nghia Export Metal Hoof P-01 a reliable choice for salons that operate according to strict hygiene protocols. Sterilization and disinfection Autoclave: basic sterilization at 121°C for 15 minutes ; deactivation temperature 132–134°C at a pressure of 3 bar . Chemical disinfection: Use only liquids intended for this purpose and always follow the manufacturer's recommendations. Important points of interest Steel, including stainless steel, can be damaged under improper conditions. Deviations from the recommended concentrations or disinfection times (too strong a solution, too long a contact time) can lead to discoloration, pitting, or corrosion. ✔ Features / Key Benefits Professional hoof for manicure and pedicure For removing cuticles, skin and membranes Ideal for removing gel and acrylic residue from nail plate and nail Made of polished stainless steel (quality for surgical instruments) 2 precision points : point + rectangular sharp Non-slip handle with light notches for stable control Suitable for all sterilization and disinfection methods Instructions for use Use the pointed side for precise work in smaller areas and to gently clean along the cuticle line. Use the rectangular, sharp side for controlled cleaning of the nail plate and to gradually remove product residue (gel/acrylic). Always apply light pressure to protect the natural nail. Clean and disinfect/sterilize the tool immediately after use according to your salon protocol. Specifications / Technical information Type: metal hoof / cuticle pusher Material: polished stainless steel Ends: point + rectangular sharp Total length: 12 cm Weight: 13 g Handle: lightly recessed anti-slip Sterilization: chemical, thermal, chemical-thermal (including autoclave) Additional information For a sleek and professional result, proper preparation is essential. By cleaning the nail plate and carefully working the cuticle area, you improve the adhesion of products like gel polish, BIAB, gel, and acrylic. Thanks to the combination of two tips, this hoof is a multifunctional tool that deserves a permanent place in almost every nail treatment. Is this metal hoof suitable for both manicures and pedicures? Yes, the Nghia Export Metal Hoof P-01 is designed for professional use in both manicures and pedicures. What do I use the pointed tip for? The pointed tip is ideal for detail work, reaching narrow areas and precise cleaning along the cuticle line. What do I use the rectangular sharp tip for? Use the rectangular tip to clean the nail plate in a controlled manner and to remove stubborn gel or acrylic residue step by step. Can I sterilize this instrument in an autoclave? Yes, the tool is suitable for autoclave sterilization. Follow the recommended parameters (121°C/15 min; 132–134°C deactivation; 3 bar) and your salon protocol. Why can metal discolour or become damaged during disinfection? Solutions that are too strong or that can be left for too long can cause a reaction, which can lead to discolouration, pitting or corrosion.

Read more less

The Nghia Export Metal Hoof P-02 is a professional manicure and pedicure tool designed for extremely precise work on cuticles, the nail plate, and stubborn product residue. This tool is perfect for nail technicians, pedicurists, and salon professionals looking for a reliable, hygienic, and durable solution for preparing and refining the nail plate. This metal hoof is designed to gently but effectively push back the skin and remove cuticles, cuticles, and membranes with extreme precision. It's also ideal for removing gel and acrylic residue from the nail plate without unnecessary damage to the natural surface. Its clever design allows you to work in a controlled, clean, and efficient manner – exactly what you need for a flawless finish with both manicures and pedicures. The Nghia Export P-02 is made of polished stainless steel , the same type used in surgical instrument production. This means high corrosion resistance, a long service life, and a pleasant-to-use finish. The slightly serrated/notched handle prevents slippage and ensures a stable grip, even when working with gloves or when hands are slightly damp. What makes this hoof trimmer extra practical are the two different, precision tips . You get a combination of a rounded tip for controlled retraction and a rectangular, sharper tip for precise cleaning and removing stubborn residue. The rectangular side is 4.5 mm wide , which is ideal for detailed work along the cuticle line and cleaning the nail plate. Hygiene is essential in every salon. That's why this tool is designed to be safely disinfected and sterilized by any method : chemical, thermal, or chemical-thermal. This makes the Nghia Export Metal Hoof P-02 an excellent choice for professional environments where strict hygiene protocols are followed. Sterilization and disinfection Autoclave: basic sterilization at 121°C for 15 minutes ; deactivation temperature 132–134°C at a pressure of 3 bar . Chemical disinfection: Use only liquids intended for this purpose and always follow the manufacturer's recommendations. Important points of interest Steel, including stainless steel, can be damaged under improper conditions. Deviations from the recommended concentrations or disinfection times (too strong a solution, too long a contact time) can lead to discoloration, pitting, or corrosion. ✔ Features / Key Benefits Professional hoof for manicure and pedicure For pushing back the skin and removing cuticles, skin and membranes Ideal for removing gel and acrylic residue from the nail plate. Made of polished stainless steel (surgical instrument quality) 2 precision points : rounded + rectangular sharp (rectangular tip 4.5 mm ) Non-slip handle with light indentations for a stable grip Suitable for all sterilization and disinfection methods Instructions for use Use the rounded side to gently push back the cuticles. Use the rectangular, sharper side to precisely clean the nail plate along the cuticle line and to remove any gel or acrylic residue in a controlled manner. Always apply light pressure to protect the natural nail surface. Clean and disinfect/sterilize the tool immediately after use according to your salon protocol. Specifications / Technical information Type: metal hoof / cuticle pusher Material: Polished stainless steel Ends: rounded + rectangular sharp Rectangular tip width: 4.5 mm Total length: 12.5 cm Weight: 15 g Sterilization: chemical, thermal, chemical-thermal (including autoclave) Additional information For best results, combine this tool with professional nail preparation: disinfect your hands, use clean instruments, and choose a suitable technique (dry manicure, wet manicure, or a combination). The high-quality steel and ergonomic design make this tool a strong choice for professionals who want consistently neat results. Is this hoof suitable for both manicure and pedicure? Yes, the Nghia Export Metal Hoof P-02 is designed for professional use in both manicures and pedicures and works excellently on both hands and feet. What do I use the rectangular sharp tip for? The rectangular tip is ideal for precisely cleaning the nail plate along the cuticle edge and for controlled removal of stubborn gel or acrylic residue. Is the instrument safe for autoclave sterilization? Yes, the tool is suitable for autoclave sterilization. Follow the recommended parameters (121°C/15 min; 132–134°C deactivation; 3 bar) and use your salon protocol. Why can metal discolour or become damaged? Incorrect conditions such as disinfectant solutions that are too strong or contact times that are too long can cause reactions, which can lead to discolouration, pitting or corrosion. What is the advantage of the anti-slip handle? The slightly recessed handle improves grip and control, allowing you to work more precisely and reduce the chance of slipping during treatment.

Read more less

The Omi Pro-Line Last P1 is a professional precision instrument designed for manicure and pedicure specialists who demand absolute accuracy, durability, and maximum comfort. This last is ideal for intensive daily use and offers complete control for fine, detailed nail treatments. The last is crafted with a specially designed blade and finished with a high-quality satin finish and polished elements . This combination ensures a stable grip, perfect balance, and extremely controlled work, even during prolonged and precise handling. Omi is known worldwide for its uncompromising quality. The Pro-Line series uses Japanese cobalt steel , combined with modern production technology and the expertise of highly experienced craftsmen. This results in an instrument with exceptional sharpness, wear resistance, and long service life , directly contributing to increased efficiency and noticeably greater working comfort. The Omi Pro-Line Last P1 meets professional hygiene standards and is suitable for both autoclave sterilization and chemical disinfection , provided these are performed correctly and according to the guidelines. This makes the instrument safe for use in professional salons, medical pedicure practices, and specialized nail studios. Sterilization and disinfection Autoclave: basic sterilization at 121°C for 15 minutes ; deactivation temperature 132–134°C at a pressure of 3 bar . Chemical disinfection: use only the appropriate liquids and always follow the manufacturer's recommendations. Important points of interest Steel, including stainless steel, can be damaged under improper conditions. Failure to adhere to the recommended concentrations or disinfection times can lead to discoloration, pitting, or corrosion of the instrument. ✔ Key Benefits Made from high-quality Japanese cobalt steel Satin finish with polished elements for optimal grip Exceptional sharpness and long life Professional finishing by experienced craftsmen Suitable for autoclave sterilization and chemical disinfection High precision and comfortable working during intensive treatments What is the Omi Pro-Line Last P1 suitable for? This last is ideal for professional use in manicures, pedicures and specialist nail treatments where precision and hygiene are key. Is the last suitable for daily intensive use? Yes, thanks to the use of Japanese cobalt steel and the high-quality finish, the last is designed for long-term and intensive professional use. Can the last be sterilized in an autoclave? Yes, the last is suitable for autoclave sterilization according to the specified temperature, time and pressure settings. Can any disinfectant be used? No, only use disinfectants suitable for metal instruments and always strictly follow the manufacturer's instructions. Where is the Omi Pro-Line Last P1 produced? The Omi Pro-Line instruments are produced in Vietnam, using high-quality materials and strict quality control.

Read more less

The Omi Pro-Line Last P2 is a professional precision instrument designed for manicure and pedicure specialists who demand maximum precision, durability, and comfort. Designed for intensive daily use, this last offers complete control for fine and sensitive nail treatments. The last is crafted with a specially designed blade and finished with a high-quality satin finish and polished sections . This finish guarantees a stable grip, optimal balance, and highly controlled handling, resulting in precise and comfortable work, even during extended sessions. Omi is known worldwide for its uncompromising quality philosophy. The Pro-Line series uses Japanese cobalt steel , combined with the latest production technologies and the craftsmanship of highly experienced craftsmen. This combination ensures exceptional sharpness, wear resistance, and long service life , increasing efficiency and reducing workload. The Omi Pro-Line Last P2 meets professional hygiene standards and is suitable for both autoclave sterilization and chemical disinfection , provided it is performed according to the prescribed guidelines. This makes the instrument safe for use in professional salons, medical pedicure practices, and specialized nail studios. Sterilization and disinfection Autoclave: basic sterilization at 121°C for 15 minutes ; deactivation temperature 132–134°C at a pressure of 3 bar . Chemical disinfection: use only liquids intended for this purpose and always follow the manufacturer's recommendations. Important points of interest Steel, including stainless steel, can be damaged under improper conditions. Failure to adhere to the recommended concentrations or disinfection times can lead to discoloration, pitting, or corrosion of the instrument. ✔ Key Benefits Made of high quality Japanese cobalt steel Satin finish with polished parts for optimal grip Exceptional sharpness and long life Professional finishing by experienced craftsmen Suitable for autoclave sterilization and chemical disinfection High precision and comfortable working during intensive treatments What is the Omi Pro-Line Last P2 suitable for? This last is ideal for professional use in manicures, pedicures and specialist nail treatments where precision and hygiene are key. Is the last suitable for daily intensive use? Yes, thanks to the use of Japanese cobalt steel and the high-quality finish, the last is designed for long-term and intensive professional use. Can the last be sterilized in an autoclave? Yes, the last is suitable for autoclave sterilization according to the specified temperature, time and pressure settings. Can any disinfectant be used? No, only use disinfectants suitable for metal instruments and always strictly follow the manufacturer's instructions. Where is the Omi Pro-Line Last P2 produced? The Omi Pro-Line instruments are produced in Vietnam, using high-quality materials and strict quality control.

Read more less

The Omi Pro-Line Last P3 is a professional precision instrument, developed for manicure and pedicure specialists who demand maximum precision, durability, and working comfort. This last is suitable for intensive daily use and offers complete control for detailed and delicate nail treatments. The last is crafted with a specially designed blade and finished with a high-quality satin finish and polished sections . This finish provides excellent grip, optimal balance, and stable handling, enabling extremely precise and comfortable work, even during extended sessions. Omi is known worldwide for its uncompromising quality standards. The Pro-Line series uses Japanese cobalt steel , combined with the latest production technologies and the expertise of highly experienced craftsmen. This combination guarantees exceptional sharpness and wear resistance , resulting in increased efficiency and noticeably greater working comfort. The Omi Pro-Line Last P3 meets professional hygiene standards and is suitable for both autoclave sterilization and chemical disinfection , provided these are performed correctly and according to the guidelines. This makes the instrument safe for use in professional salons, medical pedicure practices, and specialized nail studios. Sterilization and disinfection Autoclave: basic sterilization at 121°C for 15 minutes ; deactivation temperature 132–134°C at a pressure of 3 bar . Chemical disinfection: use only the appropriate liquids and always follow the manufacturer's recommendations. Important points of interest Steel, including stainless steel, can be damaged under improper conditions. Failure to adhere to the recommended concentrations or disinfection times can lead to discoloration, pitting, or corrosion of the instrument. ✔ Key Benefits Made from high-quality Japanese cobalt steel Satin finish with polished parts for optimal grip Exceptional sharpness and long life Professional finishing by experienced craftsmen Suitable for autoclave sterilization and chemical disinfection High precision and comfortable working during intensive treatments What is the Omi Pro-Line Last P3 suitable for? This last is ideal for professional use in manicures, pedicures and specialist nail treatments where precision and hygiene are key. Is the last suitable for daily intensive use? Yes, thanks to the use of Japanese cobalt steel and the high-quality finish, the last is designed for long-term and intensive professional use. Can the last be sterilized in an autoclave? Yes, the last is suitable for autoclave sterilization according to the specified temperature, time and pressure settings. Can any disinfectant be used? No, only use disinfectants suitable for metal instruments and always strictly follow the manufacturer's instructions. Where is the Omi Pro-Line Last P3 produced? The Omi Pro-Line instruments are produced in Vietnam, using high-quality materials and strict quality control.

Read more less

The Omi Pro-Line Last P4 is a professional precision instrument designed for manicure and pedicure specialists who demand maximum accuracy, durability, and comfort. This last is suitable for intensive daily use and offers complete control for detailed and delicate nail treatments. The last is crafted with a specially designed blade and finished with a high-quality satin finish and polished sections . This finish provides excellent grip, optimal balance, and stable handling, enabling extremely precise and comfortable work, even during extended sessions. Omi is known worldwide for its uncompromising quality standards. The Pro-Line series utilizes Japanese cobalt steel , combined with the latest production technologies and the expertise of highly experienced craftsmen. This unique combination of materials and workmanship guarantees exceptional sharpness and wear resistance , resulting in greater efficiency and greater working comfort. The Omi Pro-Line Last P4 meets professional hygiene standards and is suitable for both autoclave sterilization and chemical disinfection , provided these are performed correctly and according to the guidelines. This makes the instrument safe for use in professional salons, medical pedicure practices, and specialized nail studios. Sterilization and disinfection Autoclave: basic sterilization at 121°C for 15 minutes ; deactivation temperature 132–134°C at a pressure of 3 bar . Chemical disinfection: use only the appropriate liquids and always follow the manufacturer's recommendations. Important points of interest Steel, including stainless steel, can be damaged under improper conditions. Failure to adhere to the recommended concentrations or disinfection times can lead to discoloration, pitting, or corrosion of the instrument. ✔ Key Benefits Made from high-quality Japanese cobalt steel Satin finish with polished parts for optimal grip Exceptional sharpness and long life Professional finishing by experienced craftsmen Suitable for autoclave sterilization and chemical disinfection High precision and comfortable working during intensive treatments What is the Omi Pro-Line Last P4 suitable for? This last is ideal for professional use in manicures, pedicures and specialist nail treatments where precision and hygiene are key. Is the last suitable for daily intensive use? Yes, thanks to the use of Japanese cobalt steel and the high-quality finish, the last is designed for long-term and intensive professional use. Can the last be sterilized in an autoclave? Yes, the last is suitable for autoclave sterilization according to the specified temperature, time and pressure settings. Can any disinfectant be used? No, only use disinfectants suitable for metal instruments and always strictly follow the manufacturer's instructions. Where is the Omi Pro-Line Last P4 produced? The Omi Pro-Line instruments are produced in Vietnam, using high-quality materials and strict quality control.

Read more less

The Omi Pro-Line Last P5 is a professional precision instrument, developed for manicure and pedicure specialists who demand high precision, durability, and comfort. Designed for intensive daily use, this last offers maximum control for detailed and delicate treatments. The last is crafted with a specially designed blade and finished with an elegant satin finish and polished sections . This finish provides excellent grip, perfect balance, and very stable handling, enabling precise and comfortable work, even during extended sessions. Omi is known for its uncompromising focus on quality. The Pro-Line series utilizes Japanese cobalt steel , combined with the latest production technologies and the craftsmanship of highly experienced craftsmen. This results in an instrument with exceptional sharpness, wear resistance, and long service life , directly contributing to increased efficiency and reduced fatigue during work. The Omi Pro-Line Last P5 meets professional hygiene standards and is suitable for both autoclave sterilization and chemical disinfection , provided these are performed correctly and according to the guidelines. This makes the instrument safe for use in professional salons, medical pedicure practices, and specialized nail studios. Sterilization and disinfection Autoclave: basic sterilization at 121°C for 15 minutes ; deactivation temperature 132–134°C at a pressure of 3 bar . Chemical disinfection: use only the appropriate liquids and always follow the manufacturer's recommendations. Important points of interest Steel, including stainless steel, can be damaged under improper conditions. Failure to adhere to the recommended concentrations or disinfection times can lead to discoloration, pitting, or corrosion of the instrument. ✔ Key Benefits Made from high-quality Japanese cobalt steel Satin finish with polished parts for optimal grip Exceptional sharpness and long life Professional finishing by experienced craftsmen Suitable for autoclave sterilization and chemical disinfection High precision and comfortable working during intensive treatments What is the Omi Pro-Line Last P5 suitable for? This last is ideal for professional use in manicures, pedicures and specialist nail treatments where precision and hygiene are essential. Is the last suitable for daily intensive use? Yes, thanks to the use of Japanese cobalt steel and the high-quality finish, the last is designed for long-term and intensive professional use. Can the last be sterilized in an autoclave? Yes, the last is suitable for autoclave sterilization according to the specified temperature, time and pressure settings. Can any disinfectant be used? No, only use disinfectants suitable for metal instruments and always strictly follow the manufacturer's instructions. Where is the Omi Pro-Line Last P5 produced? The Omi Pro-Line instruments are produced in Vietnam, using high-quality materials and strict quality control.

Read more less

The Omi Pro-Line Last P6 is a professional precision instrument designed for specialists who demand maximum control, durability, and comfort during manicures and pedicures. This last is designed for intensive daily use and meets the high demands of professional salons and medical pedicure practices. The last is crafted with a specially designed blade and finished with a high-quality satin finish and polished sections . This combination ensures excellent grip, optimal balance, and high precision, even during lengthy and detailed work. Omi is internationally renowned for its uncompromising quality. The Pro-Line series uses Japanese cobalt steel , combined with the latest production technologies and the expertise of highly experienced craftsmen. The unique properties of this steel guarantee exceptional sharpness, wear resistance, and long service life , resulting in increased efficiency and noticeably greater working comfort. The Omi Pro-Line Read P6 meets professional hygiene standards and is suitable for both autoclave sterilization and chemical disinfection , provided these are performed correctly according to the recommended guidelines. This makes the instrument safe for use in environments where hygiene and reliability are essential. Sterilization and disinfection Autoclave: basic sterilization at 121°C for 15 minutes ; deactivation temperature 132–134°C at a pressure of 3 bar . Chemical disinfection: use only liquids intended for this purpose and always follow the manufacturer's recommendations. Important points of interest Steel, including stainless steel, can be damaged under improper conditions. Deviations from the recommended sterilization or disinfection procedures, such as excessively high concentrations or excessively long exposure times, can lead to discoloration, pitting, or corrosion of the instrument. ✔ Key Benefits Made from high-quality Japanese cobalt steel Satin finish with polished parts for optimal grip Exceptional sharpness and long life Professional finishing by experienced craftsmen Suitable for autoclave sterilization and chemical disinfection High precision and comfortable working during intensive treatments What is the Omi Pro-Line Last P6 suitable for? This last is ideal for professional use in manicures, pedicures and specialist nail treatments where precision and hygiene are key. Is the last suitable for daily intensive use? Yes, thanks to the use of Japanese cobalt steel and the high-quality finish, the last is designed for long-term and intensive professional use. Can the last be sterilized in an autoclave? Yes, the last is suitable for autoclave sterilization according to the specified temperature, time and pressure settings. Can any disinfectant be used? No, only use disinfectants suitable for metal instruments and always strictly follow the manufacturer's instructions. Where is the Omi Pro-Line Last P6 produced? The Omi Pro-Line instruments are produced in Vietnam, using high-quality materials and strict quality control.

Read more less

Omi Pro-Line Last P23 is a high-quality professional instrument, developed for specialists who demand absolute precision, durability, and comfort during manicures and pedicures. Designed for intensive daily use, this last offers maximum control during precise work on nails and cuticles. The last is crafted with specially designed blades and finished with a refined satin finish and polished sections . This combination creates a professional appearance, a stable grip, and excellent maneuverability, allowing for controlled and comfortable work, even during extended sessions. Omi is known for its uncompromising approach to quality. The Pro-Line series utilizes Japanese cobalt steel , combined with the latest production technologies and the expertise of highly experienced craftsmen. The result is an instrument with exceptional sharpness and wear resistance , ensuring high efficiency and reduced strain on the job. The Omi Pro-Line Last P23 meets professional hygiene standards and is suitable for both autoclave sterilization and chemical disinfection , provided these are performed correctly according to the recommended procedures. This makes the instrument ideal for use in professional salons, medical pedicure practices, and specialized nail salons. Sterilization and disinfection Autoclave: basic sterilization at 121°C for 15 minutes ; deactivation temperature 132–134°C at a pressure of 3 bar . Chemical disinfection: use only liquids intended for this purpose and always follow the manufacturer's recommendations. Important points of interest Steel, including stainless steel, can be damaged under improper conditions. Deviations from the recommended sterilization or disinfection settings, such as excessively high concentrations or excessively long exposure times, can lead to discoloration, pitting, or corrosion of the instrument. ✔ Key Benefits Made from high-quality Japanese cobalt steel Satin finish with polished parts for optimal grip Exceptional sharpness and long life Professional finishing by experienced craftsmen Suitable for autoclave sterilization and chemical disinfection High precision and comfortable use during intensive treatments What is the Omi Pro-Line Last P23 suitable for? This last is ideal for professional use in manicures, pedicures and specialist nail treatments where precision and hygiene are key. Is the last suitable for daily intensive use? Yes, thanks to the use of Japanese cobalt steel and the high-quality finish, the last is designed for long-term and intensive professional use. Can the last be sterilized in an autoclave? Yes, the last is suitable for autoclave sterilization according to the specified temperature, time and pressure settings. Can any disinfectant be used? No, only use disinfectants suitable for metal instruments and always strictly follow the manufacturer's instructions. Where is the Omi Pro-Line Last P23 produced? The Omi Pro-Line instruments are produced in Vietnam, using high-quality materials and strict quality control.

Read more less

The Omi Pro-Line Last P38 is a professional precision instrument designed for demanding manicure and pedicure specialists. This last combines exceptional sharpness, durability, and ergonomic comfort, making it ideal for precise and intensive daily use in professional salons and medical pedicure practices. The last is crafted with specially designed blades and finished with an elegant satin finish and polished sections . This finish not only provides a high-quality appearance but also optimal control and stability while working. The instrument fits perfectly in the hand and allows for extremely precise and controlled work. Omi is known for its uncompromising approach to quality. The Pro-Line series uses Japanese cobalt steel , combined with modern production technology and the craftsmanship of highly experienced specialists. This results in a last with exceptional wear resistance and long-lasting sharpness , increasing efficiency and reducing workload. The Omi Pro-Line P38 last is fully suitable for professional use and meets high hygiene standards. The instrument can be safely cleaned via autoclave sterilization and chemical disinfection , provided it is carried out in accordance with applicable guidelines and recommendations. Sterilization and disinfection Autoclave: basic sterilization at 121°C for 15 minutes ; deactivation temperature 132–134°C at a pressure of 3 bar . Chemical disinfection: only with liquids intended for this purpose and always in accordance with the manufacturer's instructions. Important points of interest Steel—even stainless steel—can be damaged under improper conditions. Failure to adhere to recommended concentrations or disinfection times can lead to discoloration, pitting, or corrosion of the instrument. ✔ Key Benefits Made of high quality Japanese cobalt steel Satin finish with polished parts for optimal grip Exceptional sharpness and durability Professional finishing by experienced craftsmen Suitable for autoclave sterilization and chemical disinfection High precision and comfortable use during long-term treatments What is the Omi Pro-Line Last P38 suitable for? The last is intended for professional use in manicures, pedicures and specialized nail treatments where precision and hygiene are essential. Is this last suitable for intensive daily use? Yes, thanks to the use of Japanese cobalt steel and the high quality of the finish, the last is designed for intensive and long-term professional use. Can I sterilize the last in an autoclave? Yes, the last is suitable for autoclave sterilization according to the recommended temperature and time settings. Can I use any disinfectant? No, only use disinfectants suitable for metal instruments and always follow the manufacturer's recommendations. Where is the Omi Pro-Line Last P38 produced? The Omi Pro-Line instruments are produced in Vietnam with strict quality control and high-quality materials.

Read more less

The Omi Pro-Line Last P67 is a professional, high-precision tool designed for intensive use in manicure and pedicure salons. This last is known for its exceptional durability, perfect finish, and long-lasting sharpness, making it ideal for specialists who work with high precision daily. The combination of modern production technology and traditional craftsmanship results in a tool that combines comfort, control, and reliability. The last is crafted with specially designed blades and has an elegant satin finish with polished details . This not only provides a professional appearance but also improves grip and optimal control while working. Thanks to its perfect balance, the instrument sits securely in the hand, reducing fatigue and increasing precision during extended use. Omi is internationally renowned for its uncompromising quality standards. The Pro-Line series uses high-quality Japanese cobalt steel , combined with expert finishing by skilled craftsmen. This results in exceptional sharpness and wear resistance , ensuring the last maintains its performance and remains highly efficient, even under intensive professional use. This professional last is fully suitable for autoclave sterilization and chemical disinfection , provided it is carried out correctly and in accordance with the guidelines. This makes it perfectly suited to the high hygiene standards required in professional salons, medical pedicure practices, and nail salons. Sterilization and disinfection Autoclave: basic sterilization at 121°C for 15 minutes ; deactivation temperature 132–134°C at a pressure of 3 bar . Chemical disinfection: use only liquids intended for this purpose and always in accordance with the manufacturer's recommendations. Important points of interest Steel, including stainless steel, can be damaged under improper conditions. Deviations from the recommended sterilization or disinfection procedures (such as excessively high concentrations or excessively long exposure times) can lead to discoloration, pitting, or corrosion of the instrument. ✔ Key Benefits Made of high quality Japanese cobalt steel Satin finish with polished details for optimal grip Exceptional sharpness and durability Professional finishing by experienced craftsmen Suitable for autoclave sterilization and chemical disinfection Comfortable to use, even during long-term treatments What is the Omi Pro-Line Last P67 suitable for? The last is ideal for professional use in manicures, pedicures and specialist nail treatments where precision and hygiene are essential. Is this instrument suitable for daily intensive use? Yes, thanks to the use of Japanese cobalt steel and the high quality of the finish, the last is designed for daily, intensive professional use. Can the last be sterilized in an autoclave? Yes, the last is suitable for autoclave sterilization according to the recommended temperature, time and pressure settings. Can I use any disinfectant? No, use only disinfectants recommended by the manufacturer and strictly follow the prescribed concentrations and times. Where is the Omi Pro-Line Last P67 produced? The Omi Pro-Line instruments are manufactured in Vietnam, using high-quality materials and strict quality control.

Read more less

The Snippex 14 cm nail clippers are professional nail clippers designed for precise, powerful, and controlled nail cutting during manicures and pedicures. Thanks to their ideal length of 14 cm , these clippers offer an excellent balance between precision and leverage, making them very comfortable for daily professional use. The nail clippers are made of high-quality stainless steel with special physicochemical properties . This type of steel is exceptionally resistant to corrosion and external influences, such as moisture and cleaning agents. This makes the instrument durable, reliable, and suitable for intensive use in salons and pedicure practices. Thanks to their sturdy construction and stable grip, the Snippex nail clipper allows you to cut nails in a controlled manner without using excessive force. This not only increases working comfort but also ensures a clean, even cut and a professional finish. Features and Benefits ✔ Professional nail clippers for manicure and pedicure ✔ Length 14 cm for optimal control and power ✔ Made of stainless steel ✔ Steel with special physical-chemical properties ✔ Corrosion resistant to various external factors ✔ Durable and suitable for intensive professional use ✔ Ensures a clean and controlled cut Instructions for use Use the nail clippers on clean, dry nails. Cut with gentle, controlled movements and avoid forcing. Clean the tool after each use to maintain hygiene. Specifications Type: Nail clippers Length: 14 cm Material: Stainless steel Property: Corrosion resistant Sterilization & hygiene The nail clippers must be sterilized in a ball sterilizer . Regular sterilization is necessary to meet professional hygiene requirements and to ensure safe working in salon and practice environments. Is this nail clipper suitable for professional use? Yes, this nail clipper is designed for intensive professional use. What is the advantage of the 14 cm length? This length offers an ideal combination of precision and power, allowing you to work comfortably and with control. How do I sterilize these nail clippers? According to the product information, the forceps should be sterilized in a ball sterilizer.

Read more less