High-quality autoclaves Lafomed is a brand of high-quality autoclaves recognized in more than 50 countries worldwide. The autoclaves comply with relevant standards and medical guidelines. These devices are known for their low susceptibility to interference; the microprocessors use the latest generation of electronic modules. Lafomed autoclaves combine high efficiency with durability , while remaining simple and intuitive to operate for daily professional use. Top-class autoclave – medical class B The Lafomed Standard Line autoclave is recommended for hospital departments, dentistry and ophthalmology, and for biological institutes conducting research. It is also perfect for hair and beauty salons , tattoo studios , and aesthetic practices. The device is suitable for sterilizing both medical and non-medical instruments. Thanks to the collaboration between the technical departments of Lafomed and Prohaar , a device has been developed that satisfies even the most demanding users. Medical Class B sterilization guarantees maximum effectiveness and safety, including for complex (hollow) instruments. Functionality you'll appreciate immediately This compact device combines a 12-liter autoclave with a built-in thermal printer (it uses thermal paper, so no ink is needed). It features an LED display and a USB port for connecting a USB drive to save cycle results. You get 6 fully automatic programs : 4 sterilization programs and 2 test programs. The shortest sterilization program takes just 8 minutes, including drying. The autoclave has a built-in tank for clean (distilled) water for sterilization and a used water tank with a front-loading drain. The self-diagnosis system effectively protects against damage and extends the life of the unit. Additional safety is provided by the double door locking system , allowing you to work with confidence in a busy, professional environment. Automatic sterilization programs Sterilization program Type of load Total cycle time* 121° Solid Unwrapped 24 min 121° Universal Wrapped and unwrapped 35 min 134° Solid Unwrapped 8 min 134° Universal Wrapped and unwrapped 19 min Test B&D Bowie Dick test pack 4 min Vacuum Test - 15 min *Time applies after the room has warmed up. Extendable warranty (24 + 12 months) The Lafomed Standard Line autoclave comes with a 24-month warranty . The warranty is not dependent on the number of cycles performed. You can extend the warranty by 12 months , provided a paid technical inspection is performed at an authorized service center before the basic warranty expires (applicable to units purchased from August 22, 2022). A free technical passport is also included. Specification Medical class B The highest class autoclaves for highly effective sterilization of unpackaged and packaged items, regardless of the instrument type. High quality Certified to ISO 13485 and CE 1023. Also complies with BS EN 13060:2014 + A1:2018. Capacity 12 L The 12-liter autoclave is ideal for a beauty salon or tattoo studio. It can hold three trays . Built-in printer No ink needed thanks to thermal paper. Sterilization packaged and unpackaged Class B allows sterilization of both unwrapped and wrapped instruments (solid or hollow). LED display Displays time, temperature, and pressure. Indicator lights show active programs or notifications. Simple and efficient operation Clear control panel, fast and pleasant to use. 6 automatic programs 4 sterilization programs and 2 test programs: Bowie & Dick and vacuum test. USB port Save data digitally on a USB stick and retain important evidence of cycles. Built-in tanks for clean and used water Fresh water tank for distilled or deionized water. Used water tank eliminates the need for an external container. The fresh and used water drain is located at the front. Self-diagnosis Effective protection against damage and malfunctions. Stainless steel chamber (304) Durable, hygienic and an indicator of high product quality. Double door locking Advanced mechanical and electronic door security. Meets sanitary and epidemiological requirements The autoclave meets international standards. High-quality bacteria filter Replaceable every 150 cycles. Filters are available in the shop. Technical passport Technical passport (value €61.50) included. Warranty 24 months warranty, extendable by 12 months. Technical specifications Certificates and standards CE 1023, ISO 13485 BS EN 13060:2014+A1:2018 Assets 1.95 kW Tension 230 V Frequency 50/60 Hz Maximum operating temperature 137 ℃ Maximum working pressure 240 kPa Design print -0.1 / 0.27 MPa Safety valve set pressure 0.24 MPa Opening pressure safety valve 0.24 MPa ~ 0.26 MPa Tray dimensions 14 cm x 26 cm x 2 cm Timetable 4-60 min Drying time 1-25 min Pressure/vacuum cycles 1-10 times Automatic programs 134°C Universal 134°C Solid 121°C Solid 121°C Universal Vacuum test Bowie & Dick / Helix Test Device dimensions 64 cm x 43.5 cm x 36 cm Box dimensions 74 cm x 52 cm x 43 cm Room dimensions ⌀ 20 cm; depth 33 cm Material room Stainless steel 304 Net weight 51 kg Weight incl. packaging 59 kg Set contents: Autoclave, drain hose, basket with 3 trays, power cord, tray rack, tray removal holder, fuse, English manual and technical passport. Features / Key Benefits ✔ Medical class B for maximum sterilization reliability ✔ 12 liter capacity with room for 3 trays ✔ Built-in thermal printer for instant cycle reports (ink-free) ✔ USB port for storing cycle data on a USB stick ✔ LED display for time, temperature and pressure ✔ 6 automatic programs including Bowie & Dick and Vacuum test ✔ Built-in fresh and used water tank with front drain ✔ Self-diagnosis and double door locking for extra security ✔ Stainless steel 304 chamber for hygiene and long life ✔ Fast cycles : short program from 8 minutes including drying Instructions for use Fill the clean water tank with distilled or deionized water . Place the instruments on the trays (wrapped or unwrapped, depending on the selected program), close the door completely, and select the desired program via the control panel. Start the cycle and save the report via the thermal printer or save the data via the USB port . Afterward, allow the instruments to cool, handle wrapped items according to hygiene protocol, and empty the used water tank through the front drain. Clean the trays and chamber according to internal guidelines. Is this autoclave suitable for tattoo studios and beauty salons? Yes, thanks to class B and the 12L capacity , this is a very suitable autoclave for intensive professional use. What is the advantage of the built-in thermal printer? You can print a cycle report directly on thermal paper , without ink, useful for administration and quality control. Can I store cycle data digitally? Yes, you can save data to a USB stick via the USB port . What programs are available? There are 6 automatic programs : 4 sterilization programs and 2 test programs (including Bowie & Dick and Vacuum test ). How fast is the shortest sterilization program? The shortest program takes 8 minutes , including drying. Is sterilization of packaged and unpackaged instruments possible? Yes, a class B autoclave is suitable for both packaged and unpackaged (including hollow) instruments. How does the water drainage work? The autoclave has built-in tanks for clean and used water, with a front drain for added convenience. What does the self-diagnosis system mean? The device checks itself for important functions, helping to prevent damage and malfunctions, which supports durability . How often do you replace the bacteria filter? According to the product information, the filter is replaceable and is typically replaced every 150 cycles . What's in the set? Autoclave, drain hose, basket with 3 trays, power cord, tray rack, tray holder, fuse, manual (EN) and technical passport.

Read more less

High-quality autoclaves Lafomed is a brand of high-quality autoclaves recognized in more than 50 countries worldwide. The autoclaves comply with relevant standards and medical guidelines. These devices are characterized by low susceptibility to failure; the microprocessors use the latest generation of electronic modules. Lafomed autoclaves are known for their high efficiency and long service life , while remaining simple and intuitive to operate. Top-class autoclave – medical class B The Lafomed Standard Line autoclave is particularly recommended for hospital departments, dentistry and ophthalmology, and research facilities. It is also ideal for hair and beauty salons , tattoo studios , and aesthetic practices. The device is designed for sterilizing both medical and non-medical instruments. Thanks to the collaboration between the technical departments of Lafomed and Prohaar , a device has been developed that will satisfy even the most demanding users. Sterilization with a class B autoclave guarantees maximum effectiveness and safety. Functionality you'll appreciate immediately This compact device combines an 8-liter autoclave with a built-in thermal printer (no ink required, works on thermal paper). It features an LED display and a USB port for connecting a USB flash drive to save cycle results. You get 6 fully automatic programs : 4 sterilization programs and 2 test programs. The shortest sterilization program takes only 8 minutes, including drying. The autoclave has a built-in tank for clean (distilled) water for sterilization and a used water tank with a front-side drain. The self-diagnosis system effectively protects against damage and helps maintain the device's durability. Additional safety is provided by the double door locking system , allowing you to work confidently in a professional environment. Automatic sterilization programs Sterilization program Type of load Total cycle time* 121° Solid Unwrapped 24 min 121° Universal Wrapped and unwrapped 35 min 134° Solid Unwrapped 8 min 134° Universal Wrapped and unwrapped 19 min Test B&D Bowie Dick test pack 4 min Vacuum Test - 15 min *Time applies after the room has warmed up. Extendable warranty (24 + 12 months) The Lafomed Standard Line autoclave comes with a 24-month warranty . Important: The warranty is not dependent on the number of cycles performed. The warranty can be extended by 12 months , provided a paid technical inspection is performed at an authorized service center before the basic warranty expires (applicable to units purchased from August 22, 2022). A free technical passport is also included. Specification Medical class B The highest class autoclaves for highly effective sterilization of unpackaged and packaged items, regardless of the instrument type. High quality Certified to ISO 13485 and CE 1023. Also complies with BS EN 13060:2014 + A1:2018. Capacity 8 L The 8-liter autoclave is perfect for a beauty salon or tattoo studio. It can hold three trays . Built-in printer No ink needed thanks to thermal paper. Sterilization packaged and unpackaged Class B allows sterilization of both unwrapped and wrapped instruments (solid or hollow). LED display Displays time, temperature, and pressure. Indicator lights show active programs or notifications. Simple and efficient operation Clear control panel, fast and pleasant to use. 6 automatic programs 4 sterilization programs and 2 test programs: Bowie & Dick and vacuum test. USB port Save data digitally on a USB stick and retain important evidence of cycles. Built-in tanks for clean and used water Fresh water tank for distilled or deionized water. Used water tank eliminates the need for an external container. The fresh and used water drain is located at the front. Self-diagnosis Effective protection against damage and malfunctions. Stainless steel chamber (304) Durable, hygienic and an indicator of high product quality. Double door locking Advanced mechanical and electronic door security. Meets sanitary and epidemiological requirements The autoclave meets international standards. High-quality bacteria filter Replaceable every 150 cycles. Filters are available in the shop. Technical passport Technical passport (value €61.50) included. Warranty 24 months warranty, extendable by 12 months. Technical specifications Certificates and standards CE 1023, ISO 13485 BS EN 13060:2014+A1:2018 Assets 1.75 kW Tension 230 V Frequency 50/60 Hz Maximum operating temperature 137 ℃ Maximum working pressure 240 kPa Design print -0.1 / 0.27 MPa Safety valve set pressure 0.24 MPa Opening pressure safety valve 0.24 MPa ~ 0.26 MPa Tray dimensions 14 cm x 26 cm x 2 cm Timetable 4-60 min Drying time 1-25 min Pressure/vacuum cycles 1-10 times Automatic programs 134°C Universal 134°C Solid 121°C Solid 121°C Universal Vacuum test Bowie & Dick / Helix Test Box dimensions 72.5 cm x 52 cm x 43.5 cm Device dimensions 63.5 cm x 44 cm x 36 cm Room dimensions ⌀ 17 cm; depth 29 cm Material room Stainless steel 304 Net weight 35 kg Weight incl. packaging 42 kg Set contents: Autoclave, drain hose, basket with 3 trays, power cord, tray rack, tray removal holder, fuse, English manual and technical passport. Features / Key Benefits ✔ Medical class B for maximum sterilization reliability ✔ 8 liter capacity with room for 3 trays ✔ Built-in thermal printer for instant cycle reports (ink-free) ✔ USB port for storing cycle data on a USB stick ✔ LED display for time, temperature and pressure ✔ 6 automatic programs including Bowie & Dick and Vacuum test ✔ Built-in fresh and used water tank with front drain ✔ Self-diagnosis and double door locking for extra security ✔ Stainless steel 304 chamber for durability and hygiene ✔ Warranty 24 months , extendable by 12 months Instructions for use Fill the clean water tank with distilled or deionized water . Place instruments on the trays (wrapped or unwrapped, depending on the selected program) and close the door completely. Select the desired program on the control panel and start the cycle. Use the thermal printer for an instant report or save results via the USB port . Afterward, allow instruments to cool and store wrapped items according to hygiene guidelines. Empty the used water tank through the front drain and clean the trays and chamber according to internal protocol. Is this autoclave suitable for tattoo studios and beauty salons? Yes, due to the 8L capacity and class B sterilization, this model is very suitable for professional salons and studios. What is the advantage of a built-in printer? You will immediately receive a cycle report on thermal paper , without ink, useful for administration and control. Can I save the cycle results digitally? Yes, you can save data to a USB stick via the USB port . How many automatic programs are there? There are 6 automatic programs : 4 sterilization programs and 2 test programs. What is the fastest sterilization cycle? The shortest program takes 8 minutes , including drying. Does the appliance have a used water tank? Yes, there is a built-in used water tank , with a drain at the front. What tests are included? The autoclave supports, among other things, the Bowie & Dick test and the vacuum test . Is sterilization suitable for packaged and unpackaged instruments? Yes, as a Class B autoclave it is suitable for both packaged and unpackaged loads, including hollow instruments. When should the bacteria filter be replaced? The bacteria filter is removable and, according to the information, is replaced every 150 cycles . What exactly is included in the set? Autoclave, drain hose, basket with 3 trays, power cord, tray rack, tray holder, fuse, manual (EN) and technical passport.

Read more less

Renowned manufacturer of sterilization equipment Lafomed is a brand of high-quality autoclaves recognized in more than 50 countries worldwide. The autoclaves comply with relevant standards and medical guidelines. These devices are characterized by low susceptibility to interference; the microprocessors use the latest generation of electronic modules. This makes Lafomed autoclaves highly effective , durable , and simultaneously easy and intuitive to operate. Top-class autoclave – medical class B The Lafomed LFSS03AA LCD 3 L autoclave is particularly recommended for hospital departments, dentistry and ophthalmology, as well as research facilities. This model is also perfect for hair and beauty salons , tattoo studios , and aesthetic practices. The device is designed for sterilizing both medical and non-medical instruments. Thanks to the collaboration between the technical departments of Lafomed and Prohaar , a device has been developed that will satisfy even the most demanding users. Sterilization via a class B autoclave ensures maximum effectiveness and safety for both packaged and unpackaged loads. Features that speed up work The autoclave features a clear LCD display and an SD memory card slot for storing cycle results. There are 7 fully automatic programs : 4 sterilization programs, 2 test programs, and 1 drying program. The menu is intuitive, and the user-friendly interface is in English. The preheating and hold-warm functions save time and speed up cycle start-up. The Lafomed LCD 3 L also stands out for its fast sterilization programs : the shortest cycle for unwrapped instruments takes 6 minutes (including drying) and for wrapped instruments 8 minutes (after heating). Well-thought-out, solid solutions The device has a built-in tank for clean (distilled) water used for sterilization. The self-diagnosis system effectively protects against damage and supports the device's long lifespan. Automatic sterilization programs Sterilization programs Type of load Total cycle time* 134° Fast Packaged and unpackaged; solid, textile, hollow 8 minutes 134° Universal Packaged and unpackaged; solid, textile, hollow 10 minutes 121° Universal Packaged and unpackaged; solid, textile, hollow 28 minutes 134° Solid Unwrapped; light (use immediately after sterilization) 6 minutes *Time applies after the device has warmed up. Warranty (24 + 12 months) and technical passport The Lafomed autoclave is covered by a 24-month warranty . Important: the warranty is not dependent on the number of cycles performed. The warranty can be extended by 12 months , provided a paid technical inspection is performed at an authorized service center before the basic warranty expires (optional for units purchased from August 22, 2022). A technical passport is also included. On the door there is a cover under which there is a mechanism that is intended for service purposes only . Specification Medical class B The highest class autoclaves for highly effective sterilization of unpackaged and packaged items, regardless of the instrument type. High quality Autoclave produced according to ISO 13485 and CE 1023 certified. Capacity 3 liters Compact yet very practical. Unlike cassette autoclaves, this 3L model has a water tank, a drying time setting, and a stainless steel chamber. Compact size Takes up little space and is easier to move than larger autoclaves. Sterilization of loose or packaged tools Class B allows sterilization of both unwrapped and wrapped instruments (solid or hollow). LCD display Displays time, temperature, pressure and cycle progress. Simple and efficient operation Intuitive menu for quick program selection and parameter setting; interface is in English. 7 automatic programs 4 sterilization programs, 2 test programs (Bowie & Dick and vacuum test) and a drying program. Rapid sterilization Fastest program: 6 minutes including drying (unwrapped) and 8 minutes (wrapped). Adjustable drying time. SD card reader Store cycle data digitally and preserve valuable evidence. Built-in tank for clean water An external collection point is required for used water. Preheat and keep warm After switching on, the appliance heats up and stays warm to save time when starting a cycle. Self-diagnosis Effective protection against damage. Double door locking Advanced system that secures the door mechanically and electronically. Two trays for instruments A dental cassette can also be placed optionally. Stainless steel chamber (304) Highly durable and aesthetic, and an indicator of high quality. Meets sanitary and epidemiological requirements This autoclave meets international standards. Warranty 24-month warranty with the option of a 12-month extension. Technical passport The technical passport is included in the set. Technical data Certificates CE 1023, ISO 13485 Standard PN-EN 13060: 2004 + A2: 2010 Assets 2.9 kW Tension 220-240 V Frequency 50 Hz Maximum operating temperature 137 ℃ Maximum working pressure 0.24 MPa Design print -0.1 / 0.27 MPa Safety valve set pressure 0.24 MPa Opening pressure safety valve 0.24 MPa ~ 0.26 MPa Fresh water tank contents 1 L Drying time 1-25 min Vacuum cycles 1-10 times Timetable 4-60 min Room contents 3 liter Dimensions (external) 24.5 x 29 x 59 cm Packaging dimensions 30 x 34 x 65 cm Room dimensions 7.5 x 19; depth 32 cm Material room Stainless steel 304 Net weight 20 kg Weight incl. packaging 24 kg Set contents: Autoclave, drain hose, tray, power cord, tray removal holder, English manual, and technical passport. Features / Key Benefits ✔ Medical class B sterilization for maximum safety ✔ Suitable for packaged and unpackaged instruments (solid, textile, hollow) ✔ LCD display with status, temperature and pressure ✔ SD card slot to store cycle data ✔ 7 automatic programs (sterilization, tests and drying) ✔ Fast programs : 6 min (unwrapped) and 8 min (wrapped) after heating ✔ Built-in fresh water tank and self-diagnosis ✔ 304 stainless steel chamber for durability ✔ 24-month warranty with option to extend Instructions for use Fill the built-in tank with distilled water . Place instruments in the trays (wrapped or unwrapped, depending on the workflow). Select the desired program (sterilization, test, or drying) from the menu and start the cycle. Afterward, allow the instruments to dry/cool according to the selected settings. Save cycle results via the SD card if necessary. Empty the used water into an external container and clean the trays and chamber according to current hygiene protocols. Is this autoclave suitable for tattoo studios and salons? Yes, the Lafomed LFSS03AA LCD 3 L is suitable for professional environments such as tattoo studios, beauty and hair salons, and medical practices. What does medical class B mean? Class B is the highest autoclave class and allows sterilization of both wrapped and unwrapped instruments, including hollow items. How many programs does the device have? There are 7 automatic programs : 4 sterilization programs, 2 tests and 1 drying program. Can I save cycle data? Yes, you can save cycle results for evidence and archive via the SD memory card slot . How fast is sterilization? The fastest cycle takes 6 minutes including drying (unwrapped) and 8 minutes for wrapped instruments, after warming up. Do I need to use special water? Yes, for sterilization you use distilled water in the built-in clean water tank. Can I control the drying time? Yes, the appliance has the option to control the drying time (1–25 min). Is the room made of stainless steel? Yes, the chamber is made of stainless steel 304 , which is very durable and hygienic. Which instruments can I sterilize? Both medical and non-medical devices, including solid, textile and hollow instruments (packaged or unpackaged). What's in the set? Autoclave, drain hose, tray, power cord, tray removal holder, manual (EN) and technical passport.

Read more less

Lafomed produces high-quality equipment and accessories that support and optimize sterilization processes. Autoclaves from this brand are used worldwide and are known for their durability and intuitive operation. For an autoclave to function reliably and safely, properly fitting components are essential—especially when it comes to the door seal, which directly influences pressure buildup, temperature stability, and the quality of the sterilization process. The silicone seal for 3-liter autoclaves is an essential accessory that helps maintain consistent, professional sterilization quality. This seal is specifically designed to seal autoclave doors and ensures a reliable closure. A good seal is crucial for the effective operation of the device: without proper sealing, the autoclave can lose pressure, operate less efficiently, or the sterilization process can become unreliable. With a suitable silicone seal, you therefore support both the performance of the device and the safety of the treatment . Silicone is ideally suited for this type of application: the material is flexible, fits tightly, and helps maintain a stable seal under conditions where temperature and pressure play a significant role. By replacing it promptly, you prevent small leaks, irregular cycling, or unnecessary wear and tear on the door structure. This makes this seal a smart choice for anyone who relies on a 3-liter autoclave daily in their daily practice. Why this silicone seal is important Specially designed for 3-liter autoclaves Designed to securely seal the autoclave door Ensures reliable sealing and stable operation Crucial for efficient pressure build-up and process control Supports safe and consistent sterilization Helps prevent malfunctions due to leakage or poor sealing When to replace? When the door no longer closes smoothly or completely In case of visible wear, deformation or cracks in the seal When you notice that cycles are less stable or there is a loss of pressure As part of preventive maintenance to ensure reliability Who is this accessory for? For professional environments where a 3-liter autoclave is used, such as nail salons, beauty salons, pedicure and podiatry practices, tattoo studios, and other settings where hygiene and instrument safety are paramount. Frequently Asked Questions What exactly is this silicone seal for? This seal ensures an airtight and pressure-tight seal of the autoclave door, which is necessary for a correct sterilization process. Which autoclaves is this seal suitable for? This seal is intended for 3-liter autoclaves . Why is a good door seal so important? Without a proper seal, the autoclave can lose pressure , making the cycle less reliable and potentially reducing sterilization quality. How do I know when my seal needs replacing? If there are signs such as leakage, poor sealing, visible wear or irregular cycling, it is advisable to check the seal and replace it if necessary. Can a worn seal affect safety? Yes, a poor seal can make the sterilization process less effective and thus affect the safety of the hygiene procedure . Is silicone suitable for autoclave use? Yes, silicone is flexible and seals well, making it very suitable for applications where pressure and temperature play a role. Should I replace this part preventatively? In professional environments, preventative maintenance is wise. Timely replacement helps prevent malfunctions and loss of quality.

Read more less

Lafomed produces high-quality equipment that significantly improves sterilization processes. Autoclaves and accessories from this brand have gained recognition in more than 50 countries worldwide . Lafomed products are known for their durability, reliability, and intuitive operation , making them ideal for professional use. Distilled water always within reach The efficient Lafomed water distiller is a modern device that offers a simple and safe way to obtain distilled water , essential for sterilization in autoclaves and other professional applications. Thanks to its built-in water reservoir , no external water source is required, significantly increasing its ease of use and flexibility. The distillation process thoroughly purifies the water, making it safe for specialized applications within cosmetics, medical practices, dentistry, laboratories, and scientific environments. Easy operation and fast results The water distiller is designed for maximum ease of use . Simply fill the reservoir with water, close the lid, and turn the device on. The distillation process begins automatically. With a capacity of 1 liter per hour, the device delivers purified water quickly and efficiently. Additional features such as automatic switch-off after completion and overheating protection that activates at 160°C ensure a high level of safety during use. Ecological and sustainable solution A key advantage of this water distiller is its contribution to environmentally conscious practices . Producing your own distilled water eliminates the need for plastic bottles, significantly reducing waste . This makes the device not only practical but also a conscious choice for a sustainable and responsible lifestyle . Robust, solid and designed for long-term use The Lafomed water distiller is constructed of high-quality materials , including stainless steel and durable plastics, ensuring a long service life and high wear resistance . Its robust construction allows it to withstand intensive daily use, while ensuring the distillation process is stable and reliable. This device is a long-term investment for professionals who demand quality, safety and performance. The exact dimensions are visible in the image. It is recommended to read the manual carefully before first use. Included in the set: Distilling base, water reservoir, lid, filter, power cords, manual Technical specifications: Color: shades of white Reservoir material: stainless steel Capacity: 4 L Yield: 1 L per hour Power: 750 W Voltage: 220–240 V Frequently Asked Questions What is this water distiller used for? The device is used to produce distilled water for autoclaves, cosmetic, medical and laboratory applications. Is a water connection required? No, thanks to the built-in water reservoir, no external water connection is required. How quickly does the machine produce distilled water? The yield is approximately 1 liter per hour. Is the device safe to use? Yes, it has an automatic shut-off and overheat protection that activates at 160°C. Is this suitable for professional use? Yes, the device is designed for intensive professional use in salons, medical practices and laboratories. Is it environmentally friendly? Yes, through repeated use it reduces the need for plastic bottles and contributes to waste reduction.

Read more less